class Ansys.ACT.Automation.Mechanical.SolutionInformation

Bases: object

Defines a SolutionInformation.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddAddedMass	Creates a new AddedMassTracker
AddArtificialEnergy	Creates a new ArtificialEnergyTracker
AddChattering	Creates a new ContactChatteringTracker
AddClosedPenetration	Creates a new ContactClosedPenetrationTracker
AddComment	Creates a new child Comment.
AddContactDepth	Creates a new ContactDepthTracker
AddContactEnergy	Creates a new ContactEnergyTracker
AddContactForce	Creates a new ContactForceTracker
AddContactHeatFlux	Creates a new ContactHeatFluxTracker
AddContactMaxTangentialFluidPressure	Creates a new ContactMaxTangentialFluidPressureTracker
AddContactMaximumNormalStiffness	Creates a new ContactMaximumNormalStiffnessTracker
AddContactMinimumNormalStiffness	Creates a new ContactMinimumNormalStiffnessTracker
AddContactPairForceConvergenceNorm	Creates a new ContactPairForceConvergenceNormTracker
AddContactPressure	Creates a new ContactPressureTracker
AddContactingArea	Creates a new ContactingAreaTracker
AddDampingEnergy	Creates a new DampingEnergyTracker
AddDeformationPlotTracker	Creates a new TotalDeformation Plot Tracker.
AddDensity	Creates a new DensityTracker
AddDirectionalAcceleration	Creates a new DirectionalAccelerationTracker
AddDirectionalDeformation	Creates a new DirectionalDeformationTracker
AddDirectionalVelocity	Creates a new DirectionalVelocityTracker
AddEffectiveStrain	Creates a new EffectiveStrainTracker
AddEffectiveStress	Creates a new EffectiveStressTracker
AddElasticSlip	Creates a new ContactElasticSlipTracker
AddErodedInternalEnergy	Creates a new ErodedInternalEnergyTracker
AddErodedKineticEnergy	Creates a new ErodedKineticEnergyTracker
AddExternalForce	Creates a new ExternalForceTracker
AddFigure	Creates a new child Figure.
AddFluidPressure	Creates a new ContactFluidPressureTracker
AddForceReaction	Creates a new ForceReactionTracker
AddFrictionalDissipationEnergy	Creates a new ContactFrictionalDissipationEnergyTracker
AddFrictionalStress	Creates a new ContactFrictionalStressTracker
AddGap	Creates a new ContactGapTracker
AddHourglassEnergy	Creates a new HourglassEnergyTracker
AddImage	Creates a new child Image.
AddInternalEnergy	Creates a new InternalEnergyTracker
AddKineticEnergy	Creates a new KineticEnergyTracker
AddLSDYNAGeneralTracker	Creates a new LSDYNAGeneralTracker
AddLatticeDensity	Creates a new LatticeDensity
AddLatticeElementalDensity	Creates a new LatticeElementalDensity
AddMaximumDampingPressure	Creates a new ContactMaximumDampingPressureTracker
AddMaximumGeometricSlidingDistance	Creates a new ContactMaximumGeometricSlidingDistanceTracker
AddMaximumTangentialStiffness	Creates a new ContactMaximumTangentialStiffnessTracker
AddMinimumGeometricSlidingDistance	Creates a new ContactMinimumGeometricSlidingDistanceTracker
AddMinimumTangentialStiffness	Creates a new ContactMinimumTangentialStiffnessTracker
AddMomentReaction	Creates a new MomentReactionTracker
AddMomentum	Creates a new MomentumTracker
AddNonLinearStabilizationEnergy	Creates a new NonLinearStabilizationEnergyTracker
AddNumberContacting	Creates a new NumberContactingTracker
AddNumberSticking	Creates a new ContactNumberStickingTracker
AddNumberWithLargePenetration	Creates a new ContactNumberWithLargePenetrationTracker
AddNumberWithTooMuchSliding	Creates a new ContactNumberWithTooMuchSlidingTracker
AddPenetration	Creates a new ContactPenetrationTracker
AddPlasticWork	Creates a new PlasticWorkTracker
AddPosition	Creates a new PositionTracker
AddPossibleOverconstraint	Creates a new ContactPossibleOverconstraintTracker
AddPressure	Creates a new PressureTracker
AddResultingPinball	Creates a new ContactResultingPinballTracker
AddRigidBodyVelocity	Creates a new RigidBodyVelocityTracker
AddSlidingDistance	Creates a new ContactSlidingDistanceTracker
AddSlidingIndication	Creates a new ContactSlidingIndicationTracker
AddSpringTrackerDampingForce	Creates a new SpringDampingForceTracker
AddSpringTrackerElasticForce	Creates a new SpringElasticForceTracker
AddSpringTrackerElongation	Creates a new SpringElongationTracker
AddSpringTrackerVelocity	Creates a new SpringVelocityTracker
AddStabilizationEnergy	Creates a new ContactStabilizationEnergyTracker
AddStiffnessEnergy	Creates a new StiffnessEnergyTracker
AddStrainEnergy	Creates a new ContactStrainEnergyTracker
AddStrainPlotTracker	Creates a new EquivalentElasticStrainRST Plot Tracker.
AddStressPlotTracker	Creates a new EquivalentStress Plot Tracker.
AddTangentialDampingStress	Creates a new ContactTangentialDampingStressTracker
AddTemperature	Creates a new TemperatureTracker
AddTemperaturePlotTracker	Creates a new TemperatureResult Plot Tracker.
AddTopologyDensity	Creates a new TopologyDensity
AddTopologyElementalDensity	Creates a new TopologyElementalDensity
AddTopologyMultiDensity	Creates a new TopologyMultiDensity
AddTotalEnergy	Creates a new TotalEnergyTracker
AddTotalForceFromContactPressureX	Creates a new ContactTotalForceFromContactPressureXTracker
AddTotalForceFromContactPressureY	Creates a new ContactTotalForceFromContactPressureYTracker
AddTotalForceFromContactPressureZ	Creates a new ContactTotalForceFromContactPressureZTracker
AddTotalForceFromTangentialStressX	Creates a new ContactTotalForceFromTangentialStressXTracker
AddTotalForceFromTangentialStressY	Creates a new ContactTotalForceFromTangentialStressYTracker
AddTotalForceFromTangentialStressZ	Creates a new ContactTotalForceFromTangentialStressZTracker
AddTotalMassAverageVelocity	Creates a new TotalMassAverageVelocityTracker
AddVolumeLossDueToWear	Creates a new ContactVolumeLossDueToWearTracker
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Duplicate	Creates a copy of the current DataModelObject.
EvaluateAllContactTrackers	Run the EvaluateAllContactTrackers action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
ImportResultTrackersFromFile	Import Result Trackers from File.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.

Properties

Name	Description
ActivateVisibility	Gets or sets the ActivateVisibility.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
Component	Gets or sets the Component.
DataModelObjectCategory	Gets the current DataModelObject’s category.
Display	Gets or sets the Display.
DisplayFilterDuringSolve	Gets or sets the DisplayFilterDuringSolve.
DisplayPoints	Gets or sets the DisplayPoints.
DisplayType	Gets or sets the DisplayType.
DrawConnectionsAttachedTo	Gets or sets the DrawConnectionsAttachedTo.
EnvironmentSelection	Gets or Sets the EnvironmentSelection to an Analysis object.
Figures	Gets the list of associated figures.
IdentifyElementViolations	Gets or sets the IdentifyElementViolations.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
LineColor	Gets or sets the LineColor.
LineThickness	Gets or sets the LineThickness.
ModeNumber	Gets or sets the ModeNumber.
NewtonRaphsonResiduals	Gets or sets the NewtonRaphsonResiduals.
Properties	Gets the list of properties for this object.
ResponseConstraint	Gets or sets the ResponseConstraint.
ShowChargeResiduals	Gets or sets the ShowChargeResiduals.
ShowHeatResiduals	Gets or sets the ShowHeatResiduals.
ShowMomentResiduals	Gets or sets the ShowMomentResiduals.
SolutionOutput	Gets or sets the SolutionOutput.
StepNumber	Gets or sets the StepNumber.
StepSelectionMode	Gets or sets the StepSelectionMode.
SummaryType	Gets or sets the SummaryType.
UpdateInterval	Gets or sets the UpdateInterval.
VisibleOnResults	Gets or sets the VisibleOnResults.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property SolutionInformation.ActivateVisibility : bool | None

Gets or sets the ActivateVisibility.

property SolutionInformation.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property SolutionInformation.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property SolutionInformation.Component : Ansys.Mechanical.DataModel.Enums.OptimizationResponseConstraintComponentType | None

Gets or sets the Component.

property SolutionInformation.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property SolutionInformation.Display : Ansys.Mechanical.DataModel.Enums.FEConnectionDisplay | None

Gets or sets the Display.

property SolutionInformation.DisplayFilterDuringSolve : bool | None

Gets or sets the DisplayFilterDuringSolve.

property SolutionInformation.DisplayPoints : float | None

Gets or sets the DisplayPoints.

property SolutionInformation.DisplayType : Ansys.Mechanical.DataModel.Enums.FEConnectionDisplayType | None

Gets or sets the DisplayType.

property SolutionInformation.DrawConnectionsAttachedTo : Ansys.Mechanical.DataModel.Enums.NodeSelection | None

Gets or sets the DrawConnectionsAttachedTo.

property SolutionInformation.EnvironmentSelection : Any | None

Gets or Sets the EnvironmentSelection to an Analysis object.

property SolutionInformation.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property SolutionInformation.IdentifyElementViolations : int | None

Gets or sets the IdentifyElementViolations.

property SolutionInformation.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property SolutionInformation.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSSolutionInfoToolAuto | None

Gets the internal object. For advanced usage only.

property SolutionInformation.LineColor : Ansys.Mechanical.DataModel.Enums.FEConnectionLineColor | None

Gets or sets the LineColor.

property SolutionInformation.LineThickness : Ansys.Mechanical.DataModel.Enums.FEConnectionLineThicknessType | None

Gets or sets the LineThickness.

property SolutionInformation.ModeNumber : int | None

Gets or sets the ModeNumber.

property SolutionInformation.NewtonRaphsonResiduals : int | None

Gets or sets the NewtonRaphsonResiduals.

property SolutionInformation.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property SolutionInformation.ResponseConstraint : Ansys.ACT.Automation.Mechanical.ResponseConstraint | None

Gets or sets the ResponseConstraint.

property SolutionInformation.ShowChargeResiduals : bool | None

Gets or sets the ShowChargeResiduals.

property SolutionInformation.ShowHeatResiduals : bool | None

Gets or sets the ShowHeatResiduals.

property SolutionInformation.ShowMomentResiduals : bool | None

Gets or sets the ShowMomentResiduals.

property SolutionInformation.SolutionOutput : Ansys.Mechanical.DataModel.Enums.SolutionOutputType | None

Gets or sets the SolutionOutput.

property SolutionInformation.StepNumber : int | None

Gets or sets the StepNumber.

property SolutionInformation.StepSelectionMode : Ansys.Mechanical.DataModel.Enums.SeqSelectionMode | None

Gets or sets the StepSelectionMode.

property SolutionInformation.SummaryType : Ansys.Mechanical.DataModel.Enums.PFactorResultType | None

Gets or sets the SummaryType.

property SolutionInformation.UpdateInterval : float | None

Gets or sets the UpdateInterval.

property SolutionInformation.VisibleOnResults : bool | None

Gets or sets the VisibleOnResults.

property SolutionInformation.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

SolutionInformation.Activate() → None

Activate the current object.

SolutionInformation.AddAddedMass() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.AddedMassTracker

Creates a new AddedMassTracker

SolutionInformation.AddArtificialEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ArtificialEnergyTracker

Creates a new ArtificialEnergyTracker

SolutionInformation.AddChattering() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactChatteringTracker

Creates a new ContactChatteringTracker

SolutionInformation.AddClosedPenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactClosedPenetrationTracker

Creates a new ContactClosedPenetrationTracker

SolutionInformation.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

SolutionInformation.AddContactDepth() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactDepthTracker

Creates a new ContactDepthTracker

SolutionInformation.AddContactEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactEnergyTracker

Creates a new ContactEnergyTracker

SolutionInformation.AddContactForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactForceTracker

Creates a new ContactForceTracker

SolutionInformation.AddContactHeatFlux() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactHeatFluxTracker

Creates a new ContactHeatFluxTracker

SolutionInformation.AddContactMaxTangentialFluidPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaxTangentialFluidPressureTracker

Creates a new ContactMaxTangentialFluidPressureTracker

SolutionInformation.AddContactMaximumNormalStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumNormalStiffnessTracker

Creates a new ContactMaximumNormalStiffnessTracker

SolutionInformation.AddContactMinimumNormalStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumNormalStiffnessTracker

Creates a new ContactMinimumNormalStiffnessTracker

SolutionInformation.AddContactPairForceConvergenceNorm() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPairForceConvergenceNormTracker

Creates a new ContactPairForceConvergenceNormTracker

SolutionInformation.AddContactPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPressureTracker

Creates a new ContactPressureTracker

SolutionInformation.AddContactingArea() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactingAreaTracker

Creates a new ContactingAreaTracker

SolutionInformation.AddDampingEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DampingEnergyTracker

Creates a new DampingEnergyTracker

SolutionInformation.AddDeformationPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.DeformationResults.TotalDeformation

Creates a new TotalDeformation Plot Tracker.

SolutionInformation.AddDensity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DensityTracker

Creates a new DensityTracker

SolutionInformation.AddDirectionalAcceleration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalAccelerationTracker

Creates a new DirectionalAccelerationTracker

SolutionInformation.AddDirectionalDeformation() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalDeformationTracker

Creates a new DirectionalDeformationTracker

SolutionInformation.AddDirectionalVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalVelocityTracker

Creates a new DirectionalVelocityTracker

SolutionInformation.AddEffectiveStrain() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.EffectiveStrainTracker

Creates a new EffectiveStrainTracker

SolutionInformation.AddEffectiveStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.EffectiveStressTracker

Creates a new EffectiveStressTracker

SolutionInformation.AddElasticSlip() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactElasticSlipTracker

Creates a new ContactElasticSlipTracker

SolutionInformation.AddErodedInternalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ErodedInternalEnergyTracker

Creates a new ErodedInternalEnergyTracker

SolutionInformation.AddErodedKineticEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ErodedKineticEnergyTracker

Creates a new ErodedKineticEnergyTracker

SolutionInformation.AddExternalForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ExternalForceTracker

Creates a new ExternalForceTracker

SolutionInformation.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

SolutionInformation.AddFluidPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFluidPressureTracker

Creates a new ContactFluidPressureTracker

SolutionInformation.AddForceReaction() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ForceReactionTracker

Creates a new ForceReactionTracker

SolutionInformation.AddFrictionalDissipationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFrictionalDissipationEnergyTracker

Creates a new ContactFrictionalDissipationEnergyTracker

SolutionInformation.AddFrictionalStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFrictionalStressTracker

Creates a new ContactFrictionalStressTracker

SolutionInformation.AddGap() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactGapTracker

Creates a new ContactGapTracker

SolutionInformation.AddHourglassEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.HourglassEnergyTracker

Creates a new HourglassEnergyTracker

SolutionInformation.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

SolutionInformation.AddInternalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.InternalEnergyTracker

Creates a new InternalEnergyTracker

SolutionInformation.AddKineticEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.KineticEnergyTracker

Creates a new KineticEnergyTracker

SolutionInformation.AddLSDYNAGeneralTracker() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.LSDYNAGeneralTracker

Creates a new LSDYNAGeneralTracker

SolutionInformation.AddLatticeDensity() → Ansys.ACT.Automation.Mechanical.Results.LatticeDensity

Creates a new LatticeDensity

SolutionInformation.AddLatticeElementalDensity() → Ansys.ACT.Automation.Mechanical.Results.LatticeElementalDensity

Creates a new LatticeElementalDensity

SolutionInformation.AddMaximumDampingPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumDampingPressureTracker

Creates a new ContactMaximumDampingPressureTracker

SolutionInformation.AddMaximumGeometricSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumGeometricSlidingDistanceTracker

Creates a new ContactMaximumGeometricSlidingDistanceTracker

SolutionInformation.AddMaximumTangentialStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumTangentialStiffnessTracker

Creates a new ContactMaximumTangentialStiffnessTracker

SolutionInformation.AddMinimumGeometricSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumGeometricSlidingDistanceTracker

Creates a new ContactMinimumGeometricSlidingDistanceTracker

SolutionInformation.AddMinimumTangentialStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumTangentialStiffnessTracker

Creates a new ContactMinimumTangentialStiffnessTracker

SolutionInformation.AddMomentReaction() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.MomentReactionTracker

Creates a new MomentReactionTracker

SolutionInformation.AddMomentum() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.MomentumTracker

Creates a new MomentumTracker

SolutionInformation.AddNonLinearStabilizationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.NonLinearStabilizationEnergyTracker

Creates a new NonLinearStabilizationEnergyTracker

SolutionInformation.AddNumberContacting() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.NumberContactingTracker

Creates a new NumberContactingTracker

SolutionInformation.AddNumberSticking() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberStickingTracker

Creates a new ContactNumberStickingTracker

SolutionInformation.AddNumberWithLargePenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberWithLargePenetrationTracker

Creates a new ContactNumberWithLargePenetrationTracker

SolutionInformation.AddNumberWithTooMuchSliding() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberWithTooMuchSlidingTracker

Creates a new ContactNumberWithTooMuchSlidingTracker

SolutionInformation.AddPenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPenetrationTracker

Creates a new ContactPenetrationTracker

SolutionInformation.AddPlasticWork() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PlasticWorkTracker

Creates a new PlasticWorkTracker

SolutionInformation.AddPosition() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PositionTracker

Creates a new PositionTracker

SolutionInformation.AddPossibleOverconstraint() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPossibleOverconstraintTracker

Creates a new ContactPossibleOverconstraintTracker

SolutionInformation.AddPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PressureTracker

Creates a new PressureTracker

SolutionInformation.AddResultingPinball() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactResultingPinballTracker

Creates a new ContactResultingPinballTracker

SolutionInformation.AddRigidBodyVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.RigidBodyVelocityTracker

Creates a new RigidBodyVelocityTracker

SolutionInformation.AddSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactSlidingDistanceTracker

Creates a new ContactSlidingDistanceTracker

SolutionInformation.AddSlidingIndication() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactSlidingIndicationTracker

Creates a new ContactSlidingIndicationTracker

SolutionInformation.AddSpringTrackerDampingForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringDampingForceTracker

Creates a new SpringDampingForceTracker

SolutionInformation.AddSpringTrackerElasticForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringElasticForceTracker

Creates a new SpringElasticForceTracker

SolutionInformation.AddSpringTrackerElongation() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringElongationTracker

Creates a new SpringElongationTracker

SolutionInformation.AddSpringTrackerVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringVelocityTracker

Creates a new SpringVelocityTracker

SolutionInformation.AddStabilizationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactStabilizationEnergyTracker

Creates a new ContactStabilizationEnergyTracker

SolutionInformation.AddStiffnessEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.StiffnessEnergyTracker

Creates a new StiffnessEnergyTracker

SolutionInformation.AddStrainEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactStrainEnergyTracker

Creates a new ContactStrainEnergyTracker

SolutionInformation.AddStrainPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.StrainResults.EquivalentElasticStrainRST

Creates a new EquivalentElasticStrainRST Plot Tracker.

SolutionInformation.AddStressPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.StressResults.EquivalentStress

Creates a new EquivalentStress Plot Tracker.

SolutionInformation.AddTangentialDampingStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTangentialDampingStressTracker

Creates a new ContactTangentialDampingStressTracker

SolutionInformation.AddTemperature() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TemperatureTracker

Creates a new TemperatureTracker

SolutionInformation.AddTemperaturePlotTracker() → Ansys.ACT.Automation.Mechanical.Results.ThermalResults.TemperatureResult

Creates a new TemperatureResult Plot Tracker.

SolutionInformation.AddTopologyDensity() → Ansys.ACT.Automation.Mechanical.Results.TopologyDensity

Creates a new TopologyDensity

SolutionInformation.AddTopologyElementalDensity() → Ansys.ACT.Automation.Mechanical.Results.TopologyElementalDensity

Creates a new TopologyElementalDensity

SolutionInformation.AddTopologyMultiDensity() → Ansys.ACT.Automation.Mechanical.Results.TopologyMultiDensity

Creates a new TopologyMultiDensity

SolutionInformation.AddTotalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TotalEnergyTracker

Creates a new TotalEnergyTracker

SolutionInformation.AddTotalForceFromContactPressureX() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureXTracker

Creates a new ContactTotalForceFromContactPressureXTracker

SolutionInformation.AddTotalForceFromContactPressureY() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureYTracker

Creates a new ContactTotalForceFromContactPressureYTracker

SolutionInformation.AddTotalForceFromContactPressureZ() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureZTracker

Creates a new ContactTotalForceFromContactPressureZTracker

SolutionInformation.AddTotalForceFromTangentialStressX() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressXTracker

Creates a new ContactTotalForceFromTangentialStressXTracker

SolutionInformation.AddTotalForceFromTangentialStressY() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressYTracker

Creates a new ContactTotalForceFromTangentialStressYTracker

SolutionInformation.AddTotalForceFromTangentialStressZ() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressZTracker

Creates a new ContactTotalForceFromTangentialStressZTracker

SolutionInformation.AddTotalMassAverageVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TotalMassAverageVelocityTracker

Creates a new TotalMassAverageVelocityTracker

SolutionInformation.AddVolumeLossDueToWear() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactVolumeLossDueToWearTracker

Creates a new ContactVolumeLossDueToWearTracker

SolutionInformation.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

SolutionInformation.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

SolutionInformation.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

SolutionInformation.EvaluateAllContactTrackers() → None

Run the EvaluateAllContactTrackers action.

SolutionInformation.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

SolutionInformation.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

SolutionInformation.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

SolutionInformation.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

SolutionInformation.ImportResultTrackersFromFile(fileName: str) → None

Import Result Trackers from File.

SolutionInformation.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

SolutionInformation.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

SolutionInformation.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

SolutionInformation.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.