`ForceReaction`

class Ansys.ACT.Automation.Mechanical.Results.ProbeResults.ForceReaction

Bases: object

Defines a ForceReaction.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
RetrieveResult	Evaluates the individual probe result without evaluating all the results in the same solution.
SnapToMeshNodes	Snap the coordinates of probe result to the mesh nodes.

Properties

Name	Description
Beam	Gets or sets the Beam.
BeamSelection	Gets or sets the BeamSelection.
BoundaryConditionSelection	Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.
By	Gets or sets the By.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
ContactForce	Gets or sets the ContactForce.
ContactRegionSelection	Gets or sets the ContactRegionSelection.
CoordinateSystemSelection	Gets or sets the CoordinateSystemSelection.
DataModelObjectCategory	Gets the current DataModelObject’s category.
DisplayTime	Gets or sets the DisplayTime.
DpfEvaluation	Gets or sets the DpfEvaluation.
Extraction	Gets or sets the Extraction.
Figures	Gets the list of associated figures.
Frequency	Gets or sets the Frequency.
GeometryLocation	Gets or sets the GeometryLocation.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IsSolved	Gets the IsSolved.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepNumber	Gets or sets the LoadStepNumber.
LocationMethod	Gets or sets the LocationMethod.
MaximumTotal	Gets the MaximumTotal.
MaximumXAxis	Gets the MaximumXAxis.
MaximumYAxis	Gets the MaximumYAxis.
MaximumZAxis	Gets the MaximumZAxis.
MeshConnectionSelection	Gets or sets the MeshConnectionSelection.
MinimumTotal	Gets the MinimumTotal.
MinimumXAxis	Gets the MinimumXAxis.
MinimumYAxis	Gets the MinimumYAxis.
MinimumZAxis	Gets the MinimumZAxis.
Mode	Gets or sets the Mode.
Orientation	Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
PhaseIncrement	Gets or sets the PhaseIncrement.
Probability	Gets the Probability.
Properties	Gets the list of properties for this object.
RPMSelection	Gets or sets the RPM Selection value at which the results are evaluated.
Reference	Gets the Reference.
RemotePointSelection	Gets or sets the RemotePointSelection.
RemotePoints	Gets or sets the RemotePoints.
ReportedFrequency	Gets the ReportedFrequency.
ResultSelection	Gets or sets the ResultSelection.
ScaleFactor	Gets or sets the ScaleFactor.
ScaleFactorValue	Gets or sets the ScaleFactorValue.
SpatialResolution	Gets or sets the SpatialResolution.
Spring	Gets or sets the Spring.
SpringSelection	Gets or sets the SpringSelection.
Substep	Gets the Substep.
Summation	Gets or sets the Summation.
Suppressed	Gets or sets the Suppressed.
SurfaceArea	Gets the SurfaceArea.
SurfaceSelection	Gets or sets the MeshConnectionSelection.
SweepingPhase	Gets or sets the SweepingPhase.
SymmetryMultiplier	Gets or sets the SymmetryMultiplier.
Time	Gets the Time.
Total	Gets the Total.
Type	Gets the Type.
VisibleProperties	Gets the list of properties that are visible for this object.
XAxis	Gets the XAxis.
YAxis	Gets the YAxis.
ZAxis	Gets the ZAxis.

Property detail

property ForceReaction.Beam : Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the Beam.

property ForceReaction.BeamSelection : Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the BeamSelection.

property ForceReaction.BoundaryConditionSelection : Ansys.ACT.Automation.Mechanical.DataModelObject | None

Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.

property ForceReaction.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property ForceReaction.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ForceReaction.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ForceReaction.ContactForce : Ansys.Mechanical.DataModel.Enums.ContactForceType | None

Gets or sets the ContactForce.

property ForceReaction.ContactRegionSelection : Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None

Gets or sets the ContactRegionSelection.

property ForceReaction.CoordinateSystemSelection : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystemSelection.

property ForceReaction.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property ForceReaction.DisplayTime : Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property ForceReaction.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property ForceReaction.Extraction : Ansys.Mechanical.DataModel.Enums.ProbeExtractionType | None

Gets or sets the Extraction.

property ForceReaction.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ForceReaction.Frequency : Ansys.Core.Units.Quantity | None

Gets or sets the Frequency.

property ForceReaction.GeometryLocation : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometryLocation.

property ForceReaction.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ForceReaction.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None

Gets the internal object. For advanced usage only.

property ForceReaction.IsSolved : bool | None

Gets the IsSolved.

property ForceReaction.IterationNumber : int | None

Gets the IterationNumber.

property ForceReaction.LoadStep : int | None

Gets the LoadStep.

property ForceReaction.LoadStepNumber : int | None

Gets or sets the LoadStepNumber.

property ForceReaction.LocationMethod : Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None

Gets or sets the LocationMethod.

property ForceReaction.MaximumTotal : Ansys.Core.Units.Quantity | None

Gets the MaximumTotal.

property ForceReaction.MaximumXAxis : Ansys.Core.Units.Quantity | None

Gets the MaximumXAxis.

property ForceReaction.MaximumYAxis : Ansys.Core.Units.Quantity | None

Gets the MaximumYAxis.

property ForceReaction.MaximumZAxis : Ansys.Core.Units.Quantity | None

Gets the MaximumZAxis.

property ForceReaction.MeshConnectionSelection : Ansys.ACT.Automation.Mechanical.MeshConnection | None

Gets or sets the MeshConnectionSelection.

property ForceReaction.MinimumTotal : Ansys.Core.Units.Quantity | None

Gets the MinimumTotal.

property ForceReaction.MinimumXAxis : Ansys.Core.Units.Quantity | None

Gets the MinimumXAxis.

property ForceReaction.MinimumYAxis : Ansys.Core.Units.Quantity | None

Gets the MinimumYAxis.

property ForceReaction.MinimumZAxis : Ansys.Core.Units.Quantity | None

Gets the MinimumZAxis.

property ForceReaction.Mode : int | None

Gets or sets the Mode.

property ForceReaction.Orientation : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.

property ForceReaction.PhaseIncrement : Ansys.Core.Units.Quantity | None

Gets or sets the PhaseIncrement.

property ForceReaction.Probability : float | None

Gets the Probability.

property ForceReaction.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ForceReaction.RPMSelection : Ansys.Core.Units.Quantity | None

Gets or sets the RPM Selection value at which the results are evaluated.

property ForceReaction.Reference : Ansys.Mechanical.DataModel.Enums.ResultRelativityType | None

Gets the Reference.

property ForceReaction.RemotePointSelection : Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePointSelection.

property ForceReaction.RemotePoints : Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePoints.

property ForceReaction.ReportedFrequency : Ansys.Core.Units.Quantity | None

Gets the ReportedFrequency.

property ForceReaction.ResultSelection : Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None

Gets or sets the ResultSelection.

property ForceReaction.ScaleFactor : Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None

Gets or sets the ScaleFactor.

property ForceReaction.ScaleFactorValue : float | None

Gets or sets the ScaleFactorValue.

property ForceReaction.SpatialResolution : Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None

Gets or sets the SpatialResolution.

property ForceReaction.Spring : Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the Spring.

property ForceReaction.SpringSelection : Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the SpringSelection.

property ForceReaction.Substep : int | None

Gets the Substep.

property ForceReaction.Summation : Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None

Gets or sets the Summation.

property ForceReaction.Suppressed : bool | None

Gets or sets the Suppressed.

property ForceReaction.SurfaceArea : Ansys.Core.Units.Quantity | None

Gets the SurfaceArea.

property ForceReaction.SurfaceSelection : Ansys.ACT.Automation.Mechanical.Surface | None

Gets or sets the MeshConnectionSelection.

property ForceReaction.SweepingPhase : Ansys.Core.Units.Quantity | None

Gets or sets the SweepingPhase.

property ForceReaction.SymmetryMultiplier : float | None

Gets or sets the SymmetryMultiplier.

property ForceReaction.Time : Ansys.Core.Units.Quantity | None

Gets the Time.

property ForceReaction.Total : Ansys.Core.Units.Quantity | None

Gets the Total.

property ForceReaction.Type : Ansys.Mechanical.DataModel.Enums.ProbeResultType | None

Gets the Type.

property ForceReaction.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property ForceReaction.XAxis : Ansys.Core.Units.Quantity | None

Gets the XAxis.

property ForceReaction.YAxis : Ansys.Core.Units.Quantity | None

Gets the YAxis.

property ForceReaction.ZAxis : Ansys.Core.Units.Quantity | None

Gets the ZAxis.

Method detail

ForceReaction.Activate() → None

Activate the current object.

ForceReaction.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ForceReaction.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ForceReaction.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ForceReaction.ClearGeneratedData() → None

Run the ClearGeneratedData action.

ForceReaction.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ForceReaction.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ForceReaction.Delete() → None

Run the Delete action.

ForceReaction.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ForceReaction.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject

Run the DuplicateWithoutResults action.

ForceReaction.EvaluateAllResults() → None

Run the EvaluateAllResults action.

ForceReaction.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None

Run the ExportAnimation action.

ForceReaction.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ForceReaction.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ForceReaction.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ForceReaction.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ForceReaction.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ForceReaction.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ForceReaction.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

ForceReaction.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

ForceReaction.RetrieveResult() → None

Evaluates the individual probe result without evaluating all the results in the same solution.

ForceReaction.SnapToMeshNodes() → None

Snap the coordinates of probe result to the mesh nodes.