`Mesh`
Last update: 16.07.2025class Ansys.ACT.Automation.Mechanical.MeshControls.Mesh
Bases: object
Defines a Mesh.
Overview
Methods
| Name | Description |
|---|---|
Activate |
Activate the current object. |
ActivateAllSolidSurfaceWorksheetRows |
ActivateAllSolidSurfaceWorksheetRows method. |
ActivateAllSurfaceWorksheetRows |
ActivateAllSurfaceWorksheetRows method. |
ActivateAllVolumeWorksheetRows |
ActivateAllVolumeWorksheetRows method. |
AddAutomaticMethod |
Creates a new AutomaticMethod |
AddComment |
Creates a new child Comment. |
AddConnect |
Creates a new Connect Control |
AddContactMatchGroup |
Add a new AddContactMatchGroup. |
AddContactSizing |
Creates a new ContactSizing |
AddDeviation |
Creates a new SagControl |
AddDirectMorph |
Add a new DirectMorph. |
AddFaceMeshing |
Creates a new FaceMeshing |
AddFeatureSuppress |
Creates a new FeatureSuppress |
AddFigure |
Creates a new child Figure. |
AddGasket |
Adds a Gasket Object under Mesh |
AddGeometryFidelity |
Creates a new GeometryFidelity |
AddImage |
Creates a new child Image. |
AddInflation |
Creates a new Inflation |
AddManualMeshConnection |
Add a new ManualMeshConnection |
AddMatchControl |
Creates a new MatchControl |
AddMeshConnectionGroup |
Add a new MeshConnectionGroup. |
AddMeshCopy |
Creates a new MeshCopy |
AddMeshLayers |
Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode. |
AddNodeMerge |
Add a new NodeMerge. |
AddNodeMergeGroup |
Add a new NodeMergeGroup. |
AddPinch |
Creates a new Pinch |
AddPullExtrude |
Add a new Pull (Extrude). |
AddPullRevolve |
Add a new Pull (Revolve). |
AddPullSurfaceCoating |
Add a new Pull (Surface Coating)). |
AddRefinement |
Creates a new Refinement |
AddRepairTopology |
Creates a new RepairTopology |
AddSizing |
Creates a new Sizing |
AddTopologySuppressControl |
Creates a new TopologySuppressControl |
AddWasher |
Creates a new SagControl |
AddWeld |
Creates a new WeldControl |
CleanPartOrBody |
Clear generated data for parts and/or bodies provided. |
ClearGeneratedData |
Run the ClearGeneratedData action. |
CopyTo |
Copies all visible properties from this object to another. |
CreateMQSolidSurfaceElementsNamedSelection |
Create Mesh Quality SolidSurface Element Name Selection |
CreateMQSurfaceElementsNamedSelection |
Create Mesh Quality Surface Element Named Selection |
CreateMQVolumeElementsNamedSelection |
Create Mesh Quality Volume Element Name Selection |
CreateParameter |
Creates a new parameter for a Property. |
CreatePinchControls |
Run the CreatePinchControls action. |
DeactivateAllSolidSurfaceWorksheetRows |
DeactivateAllSolidSurfaceWorksheetRows method. |
DeactivateAllSurfaceWorksheetRows |
DeactivateAllSurfaceWorksheetRows method. |
DeactivateAllVolumeWorksheetRows |
DeactivateAllVolumeWorksheetRows method. |
Duplicate |
Creates a copy of the current DataModelObject. |
ExportWeldDefinitionFile |
Export the weld definition file to the specified location. |
GenerateMesh |
Run the GenerateMesh action. |
GetActiveSurfaceMeshQuality |
Get Active User Mesh Quality |
GetChildren |
Gets the list of children, filtered by type. |
GetIsShellTargetMetric |
Get Shell Target Metric |
GetIsSolidSurfaceTargetMetric |
Get SolidSurface Target Metric |
GetIsSolidTargetMetric |
Get Solid Target Metric |
GetMeshMetricOptions |
GetMeshMetricOptions method. |
GetParameter |
Gets the parameter corresponding to the given property. |
GetSolidSurfaceMeshMetrics |
GetSolidSurfaceMeshMetrics method. |
GetSolidSurfaceMeshQualityAverageMetricValue |
Get Mesh Quality Average Metric Value |
GetSolidSurfaceMeshQualityCountFailed |
Get Mesh Quality Count Failed |
GetSolidSurfaceMeshQualityErrorLimit |
Get Mesh Quality Error Limit |
GetSolidSurfaceMeshQualityName |
Get Mesh Quality Name |
GetSolidSurfaceMeshQualityPercentageFailed |
Get Mesh Quality Percentage Failed |
GetSolidSurfaceMeshQualityWarningCountFailed |
Get Mesh Quality Warning Count Failed |
GetSolidSurfaceMeshQualityWarningLimit |
Get Mesh Quality Warning Limit |
GetSolidSurfaceMeshQualityWarningPercentageFailed |
Get Mesh Quality Warning Percentage Failed |
GetSolidSurfaceMeshQualityWorstMetricBackgroundColor |
Get Mesh Quality Worst Metric BackgroundColor |
GetSolidSurfaceMeshQualityWorstMetricValue |
Get Mesh Quality Worst Metric Value |
GetSurfaceMeshQualityAverageMetricValue |
Get Mesh Quality Average Metric Value |
GetSurfaceMeshQualityCountFailed |
Get Mesh Quality Count Failed |
GetSurfaceMeshQualityErrorLimit |
Get User Mesh Quality Error Limit |
GetSurfaceMeshQualityName |
Get Mesh Quality Name |
GetSurfaceMeshQualityPercentageFailed |
Get Mesh Quality Percentage Failed |
GetSurfaceMeshQualityWarningCountFailed |
Get Mesh Quality Warning Count Failed |
GetSurfaceMeshQualityWarningLimit |
Get User Mesh Quality Warning Limit |
GetSurfaceMeshQualityWarningPercentageFailed |
Get Mesh Quality Warning Percentage Failed |
GetSurfaceMeshQualityWorstMetricValue |
Get Mesh Quality Worst Metric Value |
GetVolumeMeshMetrics |
GetVolumeMeshMetrics method. |
GetVolumeMeshQualityAverageMetricValue |
Get Mesh Quality Average Metric Value |
GetVolumeMeshQualityCountFailed |
Get Mesh Quality Count Failed |
GetVolumeMeshQualityErrorLimit |
Get Mesh Quality Error Limit |
GetVolumeMeshQualityName |
Get Mesh Quality Name |
GetVolumeMeshQualityPercentageFailed |
Get Mesh Quality Percentage Failed |
GetVolumeMeshQualityWarningCountFailed |
Get Mesh Quality Warning Count Failed |
GetVolumeMeshQualityWarningLimit |
Get Mesh Quality Warning Limit |
GetVolumeMeshQualityWarningPercentageFailed |
Get Mesh Quality Warning Percentage Failed |
GetVolumeMeshQualityWorstMetricBackgroundColor |
Get Mesh Quality Worst Metric BackgroundColor |
GetVolumeMeshQualityWorstMetricValue |
Get Mesh Quality Worst Metric Value |
GroupAllSimilarChildren |
Run the GroupAllSimilarChildren action. |
GroupSimilarObjects |
Run the GroupSimilarObjects action. |
IsMeshMetricVisible |
IsMeshMetricVisible method. |
LoadMQWorksheetFile |
LoadMQWorksheetFile method. |
PinchControlGeomtry |
Set the geometry type for the Pinch Control. |
PreviewInflation |
Run the PreviewInflation action. |
PreviewMeshOnAllWelds |
Preview model mesh on all weld controls of the Mesh. |
PreviewMeshOnWeld |
Preview model mesh on one weld control provided. |
PreviewMeshOnWeldWorksheet |
PreviewMeshOnWeldWorksheet method. |
PreviewMeshOnWelds |
PreviewMeshOnWelds method. |
PreviewSurfaceMesh |
Run the PreviewSurfaceMesh action. |
PreviewWelds |
Preview Welds. |
PropertyByAPIName |
Get a property by its API name. |
PropertyByName |
Get a property by its unique name. |
RemoveMeshLayers |
Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode. |
RemoveParameter |
Removes the parameter from the parameter set corresponding to the given property. |
SaveMQWorksheetFile |
SaveMQWorksheetFile method. |
SetActiveSolidSurfaceMeshQuality |
Set Active Mesh Quality |
SetActiveSurfaceMeshQuality |
Set Active Mesh Quality |
SetActiveVolumeMeshQuality |
Set Active Mesh Quality |
SetMeshMetricOptions |
SetMeshMetricOptions method. |
SetSolidMeshMetricLimits |
SetSolidMeshMetricLimits method. |
SetSolidSurfaceMeshMetricLimits |
SetSolidSurfaceMeshMetricLimits method. |
SetSolidSurfaceMeshQualityErrorLimit |
Set Mesh Quality Error Limit |
SetSolidSurfaceMeshQualityWarningLimit |
Set Mesh Quality Warning Limit |
SetSurfaceMeshMetricLimits |
SetSurfaceMeshMetricLimits method. |
SetSurfaceMeshQualityErrorLimit |
Set Mesh Quality Error Level |
SetSurfaceMeshQualityWarningLimit |
Set Mesh Quality Warning Limit |
SetVolumeMeshQualityErrorLimit |
Set Mesh Quality Error Limit |
SetVolumeMeshQualityWarningLimit |
Set Mesh Quality Warning Limit |
ShowAxisymmetricBodies |
Show Axisymmetric bodies. |
ShowFeatureSuppressibleFaces |
Run the ShowFeatureSuppressibleFaces action. |
ShowMappableBodies |
Run the ShowMappableBodies action. |
ShowOverlappingFaces |
Run the ShowOverlappingFaces action. |
ShowSweepableBodies |
Run the ShowSweepableBodies action. |
ShowUnconnectedFacesNearEdges |
Run the ShowUnconnectedFreeEdges action. |
Update |
Run the Update action. |
Properties
| Name | Description |
|---|---|
AspectRatio |
Gets or sets the AspectRatio. |
AutoMapFillets |
Gets or sets the Auto-Map Fillets in Mesh. Auto-Map Fillets enables the mesh generator to detect and map fillets within the limits specified by AutoMapFilletsMinimumRadius and AutoMapFilletsMaximumRadius. Default: False. |
AutoMapFilletsMaximumRadius |
Gets or sets the Maximum Radius for Auto-Map Fillets. Default: 5 * Element Size. |
AutoMapFilletsMinimumRadius |
Gets or sets the Minimum Radius for Auto-Map Fillets. Default: 0.5 * Element Size. |
AutomaticMeshBasedDefeaturing |
Gets or sets the AutomaticMeshBasedDefeaturing. |
Average |
Gets the Average. |
Beam3 |
Gets the Beam3. |
Beam4 |
Gets the Beam4. |
BeamElements |
Gets the BeamElements. |
CaptureCurvature |
Gets or sets the CaptureCurvature. |
CaptureProximity |
Gets or sets the CaptureProximity. |
CheckMeshQuality |
Gets or sets the CheckMeshQuality. |
Children |
Gets the list of children. |
CollisionAvoidance |
Gets or sets the CollisionAvoidance. |
Comments |
Gets the list of associated comments. |
ConnectionSize |
Gets or sets the ConnectionSize. |
ConnectionTolerance |
Gets or sets the ConnectionTolerance. |
ConnectionToleranceList |
Gets or sets the ConnectionToleranceList. |
CoplanarAngleTol |
Gets or sets the CoplanarAngleTol. |
CornerNodes |
Gets the CornerNodes. |
CurrentConfiguration |
Gets the Assembly Mesh’s current configuration Id. |
CurvatureNormalAngle |
Gets or sets the CurvatureNormalAngle. |
DataModelObjectCategory |
Gets the current DataModelObject’s category. |
DefaultShellMesher |
Gets or sets the default meshing engine used to mesh sheet bodies. The default value is Quad Dominant. |
DefeatureTolerance |
Gets or sets the DefeatureTolerance. |
DisplayStyle |
Gets or sets the DisplayStyle. |
ElementOrder |
Gets or sets the ElementOrder. |
ElementSize |
Gets or sets the ElementSize. |
Elements |
Gets the Elements. |
ExportFormat |
Gets or sets the ExportFormat. |
ExportUnit |
Gets or sets the ExportUnit. |
ExtraRetriesForAssembly |
Gets or sets the ExtraRetriesForAssembly. |
Figures |
Gets the list of associated figures. |
FilletRatio |
Gets or sets the FilletRatio. |
FirstLayerHeight |
Gets or sets the FirstLayerHeight. |
GapFactor |
Gets or Sets the Gap factor for Global Inflation |
GasketElements |
Gets the GasketElements. |
GeneratePinchOnRefresh |
Gets or sets the GeneratePinchOnRefresh. |
GlobalUseCustomTargetLimit |
Gets or sets the GlobalUseCustomTargetLimit. |
GrowthRate |
Gets or sets the GrowthRate. |
GrowthRateSF |
Gets or sets the GrowthRateSF. |
GrowthRateType |
Gets or sets the GrowthRateType. |
Hex20 |
Gets the Hex20. |
Hex8 |
Gets the Hex8. |
HoleRemovalTolerance |
Gets or sets the HoleRemovalTolerance. |
Images |
Gets the list of associated images. |
InflationAlgorithm |
Gets or sets the InflationAlgorithm. |
InflationElementType |
Gets or Sets the InflationElementType |
InflationOption |
Gets or sets the InflationOption. |
InitialSizeSeed |
Gets or sets the InitialSizeSeed. |
InternalObject |
Gets the internal object. For advanced usage only. |
Line2 |
Gets the Line2. |
Line3 |
Gets the Line3. |
Maximum |
Gets the Maximum. |
MaximumAngle |
Gets or sets the MaximumAngle. |
MaximumHeightOverBase |
Gets or sets the MaximumHeightOverBase. |
MaximumLayers |
Gets or sets the MaximumLayers. |
MaximumSize |
Gets or sets the MaximumSize. |
MaximumThickness |
Gets or sets the MaximumThickness. |
MeshBasedConnection |
Gets or sets the MeshBasedConnection. |
MeshMetric |
Gets or sets the MeshMetric. |
MeshMorphing |
Gets or sets the MeshMorphing. |
Method |
Gets or sets the Method. |
MidNodes |
Gets the MidNodes. |
MinimizeNumTriangles |
Gets or sets the TriangleReduction option for Batch Connections. |
Minimum |
Gets the Minimum. |
MinimumEdgeLength |
Gets the MinimumEdgeLength. |
MinimumSize |
Gets or sets the MinimumSize. |
MultiConnectionSteps |
Gets or sets the MultiConnectionSteps. |
NamedSelection |
Gets or sets the NamedSelection. |
Nodes |
Gets the Nodes. |
NumLayers |
Gets or Sets the Number of Layers of Global Inflation |
NumberOfCPUsForParallelPartMeshing |
Gets or sets the NumberOfCPUsForParallelPartMeshing. |
NumberOfRetries |
Gets or sets the NumberOfRetries. |
NumberOfShellMeshQualityMetrics |
Gets the number of Mesh Quality Metrics |
OrientationNodes |
Gets the OrientationNodes. |
PhysicsPreference |
Gets or sets the PhysicsPreference. |
PinchTolerance |
Gets or sets the PinchTolerance. |
Properties |
Gets the list of properties for this object. |
ProximityGapFactor |
Gets or sets the ProximityGapFactor. |
ProximityMinimumSize |
Gets or sets the ProximityMinimumSize. |
ProximitySizeSources |
Gets or sets the ProximitySizeSources. |
Pyramid13 |
Gets the Pyramid13. |
Pyramid5 |
Gets the Pyramid5. |
Quad4 |
Gets the Quad4. |
Quad8 |
Gets the Quad8. |
QuadMesh |
Gets or sets the QuadMesh. |
ReadOnly |
Gets the ReadOnly. |
Relevance |
Gets or sets the Relevance. |
RelevanceCenter |
Gets or sets the RelevanceCenter. |
Resolution |
Gets or sets the Resolution. |
RigidBodyBehavior |
Gets or sets the BoundaryCondition. |
RigidBodyFaceMeshType |
Gets or sets the RigidBodyFaceMeshType. |
ShapeChecking |
Gets or sets the ShapeChecking. |
SharedNodes |
Gets the SharedNodes. |
SheetLoopRemoval |
Gets or sets the SheetLoopRemoval. |
ShellElements |
Gets the ShellElements. |
ShowDetailedStatistics |
Gets or sets the ShowDetailedStatistics. |
Smoothing |
Gets or sets the Smoothing. |
SmoothingIterations |
Gets or sets the SmoothingIterations. |
SolidElements |
Gets the SolidElements. |
SolidShellElements |
Gets the SolidShellElements. |
SolverPreference |
Gets or sets the SolverPreference. |
SpanAngleCenter |
Gets or sets the SpanAngleCenter. |
StandardDeviation |
Gets the StandardDeviation. |
StraightSidedElements |
Gets or sets the StraightSidedElements. |
TargetCharacteristicLength |
Gets or sets the TargetCharacteristicLength. |
TargetExplicitAspectRatio |
Gets or sets the TargetExplicitAspectRatio. |
TargetQuality |
Gets or sets the TargetQuality. |
TargetSkewness |
Gets or sets the TargetSkewness. |
Tet10 |
Gets the Tet10. |
Tet4 |
Gets the Tet4. |
TopologyChecking |
Gets or sets the TopologyChecking. |
TransitionOption |
Gets or sets the TransitionOption. |
TransitionRatio |
Gets or sets the TransitionRatio. |
Tri3 |
Gets the Tri3. |
Tri6 |
Gets the Tri6. |
TriangleSurfaceMesher |
Gets or sets the TriangleSurfaceMesher. |
UseAdaptiveSizing |
Gets or sets the UseAdaptiveSizing. |
UseAdvancedSizeFunction |
Gets or sets the UseAdvancedSizeFunction. |
UseAutomaticInflation |
Gets or sets the UseAutomaticInflation. |
UseFixedSizeFunctionForSheets |
Gets or sets the UseFixedSizeFunctionForSheets. |
UsePostSmoothing |
Gets or sets the UsePostSmoothing. |
UseSheetThicknessForPinch |
Gets or sets the UseSheetThicknessForPinch. |
ViewAdvancedOptions |
Gets or sets the ViewAdvancedOptions. |
VisibleProperties |
Gets the list of properties that are visible for this object. |
Wedge15 |
Gets the Wedge15. |
Wedge6 |
Gets the Wedge6. |
Worksheet |
Get the MeshControlWorksheet action. |
Property detail
property Mesh.AspectRatio : float | None
Gets or sets the AspectRatio.
property Mesh.AutoMapFillets : bool | None
Gets or sets the Auto-Map Fillets in Mesh. Auto-Map Fillets enables the mesh generator to detect and map fillets within the limits specified by AutoMapFilletsMinimumRadius and AutoMapFilletsMaximumRadius. Default: False.
property Mesh.AutoMapFilletsMaximumRadius : Ansys.Core.Units.Quantity | None
Gets or sets the Maximum Radius for Auto-Map Fillets. Default: 5 * Element Size.
property Mesh.AutoMapFilletsMinimumRadius : Ansys.Core.Units.Quantity | None
Gets or sets the Minimum Radius for Auto-Map Fillets. Default: 0.5 * Element Size.
property Mesh.AutomaticMeshBasedDefeaturing : int | None
Gets or sets the AutomaticMeshBasedDefeaturing.
property Mesh.Average : Ansys.Core.Units.Quantity | None
Gets the Average.
property Mesh.Beam3 : int | None
Gets the Beam3.
property Mesh.Beam4 : int | None
Gets the Beam4.
property Mesh.BeamElements : int | None
Gets the BeamElements.
property Mesh.CaptureCurvature : bool | None
Gets or sets the CaptureCurvature.
property Mesh.CaptureProximity : bool | None
Gets or sets the CaptureProximity.
property Mesh.CheckMeshQuality : int | None
Gets or sets the CheckMeshQuality.
property Mesh.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets the list of children.
property Mesh.CollisionAvoidance : int | None
Gets or sets the CollisionAvoidance.
property Mesh.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None
Gets the list of associated comments.
property Mesh.ConnectionSize : float | None
Gets or sets the ConnectionSize.
property Mesh.ConnectionTolerance : float | None
Gets or sets the ConnectionTolerance.
property Mesh.ConnectionToleranceList : str | None
Gets or sets the ConnectionToleranceList.
property Mesh.CoplanarAngleTol : Ansys.Core.Units.Quantity | None
Gets or sets the CoplanarAngleTol.
property Mesh.CornerNodes : int | None
Gets the CornerNodes.
property Mesh.CurrentConfiguration : int | None
Gets the Assembly Mesh’s current configuration Id.
property Mesh.CurvatureNormalAngle : Ansys.Core.Units.Quantity | None
Gets or sets the CurvatureNormalAngle.
property Mesh.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None
Gets the current DataModelObject’s category.
property Mesh.DefaultShellMesher : Ansys.Mechanical.DataModel.Enums.DefaultShellMesherType | None
Gets or sets the default meshing engine used to mesh sheet bodies. The default value is Quad Dominant.
property Mesh.DefeatureTolerance : Ansys.Core.Units.Quantity | None
Gets or sets the DefeatureTolerance.
property Mesh.DisplayStyle : Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle | None
Gets or sets the DisplayStyle.
property Mesh.ElementOrder : Ansys.Mechanical.DataModel.Enums.ElementOrder | None
Gets or sets the ElementOrder.
property Mesh.ElementSize : Ansys.Core.Units.Quantity | None
Gets or sets the ElementSize.
property Mesh.Elements : int | None
Gets the Elements.
property Mesh.ExportFormat : Ansys.Mechanical.DataModel.Enums.FluentExportMeshType | None
Gets or sets the ExportFormat.
property Mesh.ExportUnit : Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit | None
Gets or sets the ExportUnit.
property Mesh.ExtraRetriesForAssembly : bool | None
Gets or sets the ExtraRetriesForAssembly.
property Mesh.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None
Gets the list of associated figures.
property Mesh.FilletRatio : float | None
Gets or sets the FilletRatio.
property Mesh.FirstLayerHeight : Ansys.Core.Units.Quantity | None
Gets or sets the FirstLayerHeight.
property Mesh.GapFactor : float | None
Gets or Sets the Gap factor for Global Inflation
property Mesh.GasketElements : int | None
Gets the GasketElements.
property Mesh.GeneratePinchOnRefresh : int | None
Gets or sets the GeneratePinchOnRefresh.
property Mesh.GlobalUseCustomTargetLimit : int | None
Gets or sets the GlobalUseCustomTargetLimit.
property Mesh.GrowthRate : float | None
Gets or sets the GrowthRate.
property Mesh.GrowthRateSF : float | None
Gets or sets the GrowthRateSF.
property Mesh.GrowthRateType : int | None
Gets or sets the GrowthRateType.
property Mesh.Hex20 : int | None
Gets the Hex20.
property Mesh.Hex8 : int | None
Gets the Hex8.
property Mesh.HoleRemovalTolerance : float | None
Gets or sets the HoleRemovalTolerance.
property Mesh.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None
Gets the list of associated images.
property Mesh.InflationAlgorithm : int | None
Gets or sets the InflationAlgorithm.
property Mesh.InflationElementType : Ansys.Mechanical.DataModel.Enums.MeshInflationElementType | None
Gets or Sets the InflationElementType
property Mesh.InflationOption : int | None
Gets or sets the InflationOption.
property Mesh.InitialSizeSeed : int | None
Gets or sets the InitialSizeSeed.
property Mesh.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto | None
Gets the internal object. For advanced usage only.
property Mesh.Line2 : int | None
Gets the Line2.
property Mesh.Line3 : int | None
Gets the Line3.
property Mesh.Maximum : Ansys.Core.Units.Quantity | None
Gets the Maximum.
property Mesh.MaximumAngle : Ansys.Core.Units.Quantity | None
Gets or sets the MaximumAngle.
property Mesh.MaximumHeightOverBase : float | None
Gets or sets the MaximumHeightOverBase.
property Mesh.MaximumLayers : int | None
Gets or sets the MaximumLayers.
property Mesh.MaximumSize : Ansys.Core.Units.Quantity | None
Gets or sets the MaximumSize.
property Mesh.MaximumThickness : Ansys.Core.Units.Quantity | None
Gets or sets the MaximumThickness.
property Mesh.MeshBasedConnection : bool | None
Gets or sets the MeshBasedConnection.
property Mesh.MeshMetric : Ansys.Mechanical.DataModel.Enums.MeshMetricType | None
Gets or sets the MeshMetric.
property Mesh.MeshMorphing : bool | None
Gets or sets the MeshMorphing.
property Mesh.Method : int | None
Gets or sets the Method.
property Mesh.MidNodes : int | None
Gets the MidNodes.
property Mesh.MinimizeNumTriangles : Ansys.Mechanical.DataModel.Enums.TriangleReduction | None
Gets or sets the TriangleReduction option for Batch Connections.
property Mesh.Minimum : Ansys.Core.Units.Quantity | None
Gets the Minimum.
property Mesh.MinimumEdgeLength : Ansys.Core.Units.Quantity | None
Gets the MinimumEdgeLength.
property Mesh.MinimumSize : Ansys.Core.Units.Quantity | None
Gets or sets the MinimumSize.
property Mesh.MultiConnectionSteps : bool | None
Gets or sets the MultiConnectionSteps.
property Mesh.NamedSelection : Ansys.ACT.Automation.Mechanical.NamedSelection | None
Gets or sets the NamedSelection.
property Mesh.Nodes : int | None
Gets the Nodes.
property Mesh.NumLayers : int | None
Gets or Sets the Number of Layers of Global Inflation
property Mesh.NumberOfCPUsForParallelPartMeshing : int | None
Gets or sets the NumberOfCPUsForParallelPartMeshing.
property Mesh.NumberOfRetries : int | None
Gets or sets the NumberOfRetries.
property Mesh.NumberOfShellMeshQualityMetrics : int | None
Gets the number of Mesh Quality Metrics
property Mesh.OrientationNodes : int | None
Gets the OrientationNodes.
property Mesh.PhysicsPreference : Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType | None
Gets or sets the PhysicsPreference.
property Mesh.PinchTolerance : Ansys.Core.Units.Quantity | None
Gets or sets the PinchTolerance.
property Mesh.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties for this object.
property Mesh.ProximityGapFactor : float | None
Gets or sets the ProximityGapFactor.
property Mesh.ProximityMinimumSize : Ansys.Core.Units.Quantity | None
Gets or sets the ProximityMinimumSize.
property Mesh.ProximitySizeSources : Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType | None
Gets or sets the ProximitySizeSources.
property Mesh.Pyramid13 : int | None
Gets the Pyramid13.
property Mesh.Pyramid5 : int | None
Gets the Pyramid5.
property Mesh.Quad4 : int | None
Gets the Quad4.
property Mesh.Quad8 : int | None
Gets the Quad8.
property Mesh.QuadMesh : bool | None
Gets or sets the QuadMesh.
property Mesh.ReadOnly : bool | None
Gets the ReadOnly.
property Mesh.Relevance : int | None
Gets or sets the Relevance.
property Mesh.RelevanceCenter : int | None
Gets or sets the RelevanceCenter.
property Mesh.Resolution : int | None
Gets or sets the Resolution.
property Mesh.RigidBodyBehavior : Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType | None
Gets or sets the BoundaryCondition.
property Mesh.RigidBodyFaceMeshType : Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType | None
Gets or sets the RigidBodyFaceMeshType.
property Mesh.ShapeChecking : int | None
Gets or sets the ShapeChecking.
property Mesh.SharedNodes : int | None
Gets the SharedNodes.
property Mesh.SheetLoopRemoval : bool | None
Gets or sets the SheetLoopRemoval.
property Mesh.ShellElements : int | None
Gets the ShellElements.
property Mesh.ShowDetailedStatistics : bool | None
Gets or sets the ShowDetailedStatistics.
property Mesh.Smoothing : int | None
Gets or sets the Smoothing.
property Mesh.SmoothingIterations : int | None
Gets or sets the SmoothingIterations.
property Mesh.SolidElements : int | None
Gets the SolidElements.
property Mesh.SolidShellElements : int | None
Gets the SolidShellElements.
property Mesh.SolverPreference : Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType | None
Gets or sets the SolverPreference.
property Mesh.SpanAngleCenter : int | None
Gets or sets the SpanAngleCenter.
property Mesh.StandardDeviation : Ansys.Core.Units.Quantity | None
Gets the StandardDeviation.
property Mesh.StraightSidedElements : bool | None
Gets or sets the StraightSidedElements.
property Mesh.TargetCharacteristicLength : Ansys.Core.Units.Quantity | None
Gets or sets the TargetCharacteristicLength.
property Mesh.TargetExplicitAspectRatio : float | None
Gets or sets the TargetExplicitAspectRatio.
property Mesh.TargetQuality : float | None
Gets or sets the TargetQuality.
property Mesh.TargetSkewness : Ansys.Core.Units.Quantity | None
Gets or sets the TargetSkewness.
property Mesh.Tet10 : int | None
Gets the Tet10.
property Mesh.Tet4 : int | None
Gets the Tet4.
property Mesh.TopologyChecking : bool | None
Gets or sets the TopologyChecking.
property Mesh.TransitionOption : int | None
Gets or sets the TransitionOption.
property Mesh.TransitionRatio : float | None
Gets or sets the TransitionRatio.
property Mesh.Tri3 : int | None
Gets the Tri3.
property Mesh.Tri6 : int | None
Gets the Tri6.
property Mesh.TriangleSurfaceMesher : int | None
Gets or sets the TriangleSurfaceMesher.
property Mesh.UseAdaptiveSizing : bool | None
Gets or sets the UseAdaptiveSizing.
property Mesh.UseAdvancedSizeFunction : int | None
Gets or sets the UseAdvancedSizeFunction.
property Mesh.UseAutomaticInflation : int | None
Gets or sets the UseAutomaticInflation.
property Mesh.UseFixedSizeFunctionForSheets : bool | None
Gets or sets the UseFixedSizeFunctionForSheets.
property Mesh.UsePostSmoothing : int | None
Gets or sets the UsePostSmoothing.
property Mesh.UseSheetThicknessForPinch : bool | None
Gets or sets the UseSheetThicknessForPinch.
property Mesh.ViewAdvancedOptions : bool | None
Gets or sets the ViewAdvancedOptions.
property Mesh.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties that are visible for this object.
property Mesh.Wedge15 : int | None
Gets the Wedge15.
property Mesh.Wedge6 : int | None
Gets the Wedge6.
property Mesh.Worksheet : Ansys.ACT.Interfaces.Common.IWorksheet | None
Get the MeshControlWorksheet action.
Method detail
Mesh.Activate() → None
Activate the current object.
Mesh.ActivateAllSolidSurfaceWorksheetRows() → None
ActivateAllSolidSurfaceWorksheetRows method.
Mesh.ActivateAllSurfaceWorksheetRows() → None
ActivateAllSurfaceWorksheetRows method.
Mesh.ActivateAllVolumeWorksheetRows() → None
ActivateAllVolumeWorksheetRows method.
Mesh.AddAutomaticMethod() → Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod
Creates a new AutomaticMethod
Mesh.AddComment() → Ansys.ACT.Automation.Mechanical.Comment
Creates a new child Comment.
Mesh.AddConnect() → Ansys.ACT.Automation.Mechanical.MeshControls.Connect
Creates a new Connect Control
Mesh.AddContactMatchGroup() → Ansys.ACT.Automation.Mechanical.ContactMatchGroup
Add a new AddContactMatchGroup.
Mesh.AddContactSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.ContactSizing
Creates a new ContactSizing
Mesh.AddDeviation() → Ansys.ACT.Automation.Mechanical.MeshControls.Deviation
Creates a new SagControl
Mesh.AddDirectMorph() → Ansys.ACT.Automation.Mechanical.DirectMorph
Add a new DirectMorph.
Mesh.AddFaceMeshing() → Ansys.ACT.Automation.Mechanical.MeshControls.FaceMeshing
Creates a new FaceMeshing
Mesh.AddFeatureSuppress() → Ansys.ACT.Automation.Mechanical.MeshControls.FeatureSuppress
Creates a new FeatureSuppress
Mesh.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure
Creates a new child Figure.
Mesh.AddGasket() → Ansys.ACT.Automation.Mechanical.MeshControls.Gasket
Adds a Gasket Object under Mesh
Mesh.AddGeometryFidelity() → Ansys.ACT.Automation.Mechanical.MeshControls.GeometryFidelity
Creates a new GeometryFidelity
Mesh.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
Mesh.AddInflation() → Ansys.ACT.Automation.Mechanical.MeshControls.Inflation
Creates a new Inflation
Mesh.AddManualMeshConnection() → None
Add a new ManualMeshConnection
Mesh.AddMatchControl() → Ansys.ACT.Automation.Mechanical.MeshControls.MatchControl
Creates a new MatchControl
Mesh.AddMeshConnectionGroup() → Ansys.ACT.Automation.Mechanical.MeshConnectionGroup
Add a new MeshConnectionGroup.
Mesh.AddMeshCopy() → Ansys.ACT.Automation.Mechanical.MeshControls.MeshCopy
Creates a new MeshCopy
Mesh.AddMeshLayers() → None
Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
Mesh.AddNodeMerge() → None
Add a new NodeMerge.
Mesh.AddNodeMergeGroup() → Ansys.ACT.Automation.Mechanical.NodeMergeGroup
Add a new NodeMergeGroup.
Mesh.AddPinch() → Ansys.ACT.Automation.Mechanical.MeshControls.Pinch
Creates a new Pinch
Mesh.AddPullExtrude() → Ansys.ACT.Automation.Mechanical.MeshExtrude
Add a new Pull (Extrude).
Mesh.AddPullRevolve() → Ansys.ACT.Automation.Mechanical.MeshExtrude
Add a new Pull (Revolve).
Mesh.AddPullSurfaceCoating() → Ansys.ACT.Automation.Mechanical.MeshExtrude
Add a new Pull (Surface Coating)).
Mesh.AddRefinement() → Ansys.ACT.Automation.Mechanical.MeshControls.Refinement
Creates a new Refinement
Mesh.AddRepairTopology() → Ansys.ACT.Automation.Mechanical.MeshControls.RepairTopology
Creates a new RepairTopology
Mesh.AddSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.Sizing
Creates a new Sizing
Mesh.AddTopologySuppressControl() → Ansys.ACT.Automation.Mechanical.MeshControls.TopologySuppressControl
Creates a new TopologySuppressControl
Mesh.AddWasher() → Ansys.ACT.Automation.Mechanical.MeshControls.Washer
Creates a new SagControl
Mesh.AddWeld() → Ansys.ACT.Automation.Mechanical.MeshControls.Weld
Creates a new WeldControl
Mesh.CleanPartOrBody(dataModelObjects: Iterable) → None
Clear generated data for parts and/or bodies provided.
Mesh.ClearGeneratedData() → None
Run the ClearGeneratedData action.
Mesh.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None
Copies all visible properties from this object to another.
Mesh.CreateMQSolidSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None
Create Mesh Quality SolidSurface Element Name Selection
Mesh.CreateMQSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None
Create Mesh Quality Surface Element Named Selection
Mesh.CreateMQVolumeElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None
Create Mesh Quality Volume Element Name Selection
Mesh.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter
Creates a new parameter for a Property.
Mesh.CreatePinchControls() → None
Run the CreatePinchControls action.
Mesh.DeactivateAllSolidSurfaceWorksheetRows() → None
DeactivateAllSolidSurfaceWorksheetRows method.
Mesh.DeactivateAllSurfaceWorksheetRows() → None
DeactivateAllSurfaceWorksheetRows method.
Mesh.DeactivateAllVolumeWorksheetRows() → None
DeactivateAllVolumeWorksheetRows method.
Mesh.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject
Creates a copy of the current DataModelObject.
Mesh.ExportWeldDefinitionFile(filePath: str) → None
Export the weld definition file to the specified location.
If the folder does not exist or file cannot be written to the location, an exception will be thrown.
Pre-existing files will be overwritten.
Mesh.GenerateMesh() → None
Run the GenerateMesh action.
Mesh.GetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool
Get Active User Mesh Quality
Mesh.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]
Gets the list of children, filtered by type.
Mesh.GetIsShellTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Shell Target Metric
Mesh.GetIsSolidSurfaceTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get SolidSurface Target Metric
Mesh.GetIsSolidTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Solid Target Metric
Mesh.GetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Mechanical.DataModel.Enums.MetricPreference
GetMeshMetricOptions method.
Mesh.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter
Gets the parameter corresponding to the given property.
Mesh.GetSolidSurfaceMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType
GetSolidSurfaceMeshMetrics method.
Mesh.GetSolidSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Average Metric Value
Mesh.GetSolidSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Count Failed
Mesh.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Error Limit
Mesh.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str
Get Mesh Quality Name
Mesh.GetSolidSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Percentage Failed
Mesh.GetSolidSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Warning Count Failed
Mesh.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Warning Limit
Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Warning Percentage Failed
Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str
Get Mesh Quality Worst Metric BackgroundColor
Mesh.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Worst Metric Value
Mesh.GetSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Average Metric Value
Mesh.GetSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Count Failed
Mesh.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get User Mesh Quality Error Limit
Mesh.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str
Get Mesh Quality Name
Mesh.GetSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Percentage Failed
Mesh.GetSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Warning Count Failed
Mesh.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get User Mesh Quality Warning Limit
Mesh.GetSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Warning Percentage Failed
Mesh.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Worst Metric Value
Mesh.GetVolumeMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType
GetVolumeMeshMetrics method.
Mesh.GetVolumeMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Average Metric Value
Mesh.GetVolumeMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Count Failed
Mesh.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Error Limit
Mesh.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str
Get Mesh Quality Name
Mesh.GetVolumeMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Percentage Failed
Mesh.GetVolumeMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int
Get Mesh Quality Warning Count Failed
Mesh.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Warning Limit
Mesh.GetVolumeMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float
Get Mesh Quality Warning Percentage Failed
Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str
Get Mesh Quality Worst Metric BackgroundColor
Mesh.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity
Get Mesh Quality Worst Metric Value
Mesh.GroupAllSimilarChildren() → None
Run the GroupAllSimilarChildren action.
Mesh.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder
Run the GroupSimilarObjects action.
Mesh.IsMeshMetricVisible(index: int) → bool
IsMeshMetricVisible method.
Mesh.LoadMQWorksheetFile(filePath: str) → None
LoadMQWorksheetFile method.
Mesh.PinchControlGeomtry(geomType: Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType) → None
Set the geometry type for the Pinch Control.
Mesh.PreviewInflation() → None
Run the PreviewInflation action.
Mesh.PreviewMeshOnAllWelds() → None
Preview model mesh on all weld controls of the Mesh.
Mesh.PreviewMeshOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → None
Preview model mesh on one weld control provided.
Mesh.PreviewMeshOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: Iterable[int]) → None
PreviewMeshOnWeldWorksheet method.
Mesh.PreviewMeshOnWelds(dataModelObjects: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → None
PreviewMeshOnWelds method.
Mesh.PreviewSurfaceMesh() → None
Run the PreviewSurfaceMesh action.
Mesh.PreviewWelds() → None
Preview Welds.
Mesh.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
Mesh.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property
Get a property by its unique name.
Mesh.RemoveMeshLayers() → None
Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
Mesh.RemoveParameter(propName: str) → None
Removes the parameter from the parameter set corresponding to the given property.
Mesh.SaveMQWorksheetFile(filePath: str) → None
SaveMQWorksheetFile method.
Mesh.SetActiveSolidSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None
Set Active Mesh Quality
Mesh.SetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None
Set Active Mesh Quality
Mesh.SetActiveVolumeMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None
Set Active Mesh Quality
Mesh.SetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, prefValue: Ansys.Mechanical.DataModel.Enums.MetricPreference) → None
SetMeshMetricOptions method.
Mesh.SetSolidMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None
SetSolidMeshMetricLimits method.
Mesh.SetSolidSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None
SetSolidSurfaceMeshMetricLimits method.
Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None
Set Mesh Quality Error Limit
Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None
Set Mesh Quality Warning Limit
Mesh.SetSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None
SetSurfaceMeshMetricLimits method.
Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None
Set Mesh Quality Error Level
Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None
Set Mesh Quality Warning Limit
Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None
Set Mesh Quality Error Limit
Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None
Set Mesh Quality Warning Limit
Mesh.ShowAxisymmetricBodies() → None
Show Axisymmetric bodies.
Mesh.ShowFeatureSuppressibleFaces() → None
Run the ShowFeatureSuppressibleFaces action.
Mesh.ShowMappableBodies() → None
Run the ShowMappableBodies action.
Mesh.ShowOverlappingFaces() → None
Run the ShowOverlappingFaces action.
Mesh.ShowSweepableBodies() → None
Run the ShowSweepableBodies action.
Mesh.ShowUnconnectedFacesNearEdges() → None
Run the ShowUnconnectedFreeEdges action.
Mesh.Update() → None
Run the Update action.
