Skip to main content

Mechanical scripting interface

MembraneStressEquivalent

Last update: 14.01.2025

class Ansys.ACT.Automation.Mechanical.Results.StressResults.MembraneStressEquivalent

Bases: object

Defines a MembraneStressEquivalent.

Overview

Methods

Name Description
Activate Activate the current object.
AddAlert Creates a new Alert
AddComment Creates a new child Comment.
AddConvergence Creates a new Convergence
AddFigure Creates a new child Figure.
AddImage Creates a new child Image.
ClearGeneratedData Run the ClearGeneratedData action.
CopyTo Copies all visible properties from this object to another.
CreateParameter CreateParameter method.
CreateResultsAtAllSets Creates results at all sets for results under a solution.
Delete Run the Delete action.
Duplicate Creates a copy of the current DataModelObject.
DuplicateWithoutResults Run the DuplicateWithoutResults action.
EvaluateAllResults Run the EvaluateAllResults action.
ExportAnimation Run the ExportAnimation action.
ExportToTextFile Run the ExportToTextFile action.
FetchRemoteResults Run the FetchRemoteResult action.
GetChildren Gets the list of children, filtered by type.
GetParameter Gets the parameter corresponding to the given property.
GroupAllSimilarChildren Run the GroupAllSimilarChildren action.
GroupSimilarObjects Run the GroupSimilarObjects action.
PromoteToNamedSelection Run the PromoteToNamedSelection action.
PropertyByAPIName Get a property by its API name.
PropertyByName Get a property by its unique name.
RemoveParameter Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition Run the RenameBasedOnDefinition action.

Properties

Name Description
Amplitude Gets or sets the Amplitude.
Average Gets the Average.
AverageAcrossBodies Gets or sets the AverageAcrossBodies.
AverageRadiusOfCurvature Gets or sets the AverageRadiusOfCurvature.
BendingInside Gets the BendingInside.
BendingOutside Gets the BendingOutside.
By Gets or sets the By.
CalculateTimeHistory Gets or sets the CalculateTimeHistory.
Children Gets the list of children.
CombinationNumber Gets or sets the Combination Number for a Solution Combination result.
Comments Gets the list of associated comments.
CoordinateSystem Gets or sets the Coordinate System.
CrackFrontNumber Gets or sets the CrackFrontNumber.
CyclicMode Gets or sets the CyclicMode.
DataModelObjectCategory Gets the current DataModelObject’s category.
DisplayOption Gets or sets the DisplayOption.
DisplayTime Gets or sets the DisplayTime.
DpfEvaluation Gets or sets the DpfEvaluation.
EnvironmentSelection Gets or sets the EnvironmentSelection.
Figures Gets the list of associated figures.
Frequency Gets or sets the Frequency.
GlobalIDs Gets or sets the GlobalIDs.
GraphControlsXAxis Gets or sets the GraphControlsXAxis.
HarmonicIndex Gets or sets the HarmonicIndex.
Identifier Gets or sets the Identifier.
Images Gets the list of associated images.
InternalObject Gets the internal object. For advanced usage only.
IsSolved Gets the IsSolved.
ItemType Gets or sets the ItemType.
IterationNumber Gets the IterationNumber.
IterationStep Gets or sets the IterationStep.
Layer Gets or sets the Layer.
Linearized2DBehavior Gets or sets the Linearized2DBehavior.
LoadMultiplier Gets the LoadMultiplier.
LoadStep Gets the LoadStep.
LoadStepForMaximumOfMaximumValues Get the Load Step for the maximum of maximum values.
LoadStepForMaximumOfMinimumValues Get the Load Step for the maximum of minimum values.
LoadStepForMinimumOfMaximumValues Get the Load Step for the minimum of maximum values.
LoadStepForMinimumOfMinimumValues Get the Load Step for the minimum of minimum values.
LoadStepNumber Gets or sets the LoadStepNumber.
Location Gets or sets the Location.
Maximum Gets the Maximum.
MaximumOccursOn Gets the MaximumOccursOn.
MaximumOfMaximumOverTime Gets the MaximumOfMaximumOverTime.
MaximumOfMinimumOverTime Gets the MaximumOfMinimumOverTime.
Membrane Gets the Membrane.
MembraneBendingCenter Gets the MembraneBendingCenter.
MembraneBendingInside Gets the MembraneBendingInside.
MembraneBendingOutside Gets the MembraneBendingOutside.
Minimum Gets the Minimum.
MinimumOccursOn Gets the MinimumOccursOn.
MinimumOfMaximumOverTime Gets the MinimumOfMaximumOverTime.
MinimumOfMinimumOverTime Gets the MinimumOfMinimumOverTime.
Mode Gets or sets the Mode.
NamedSelections Gets or sets the NamedSelections.
NormalOrientation Gets or sets the NormalOrientation.
Path Path property.
PeakCenter Gets the PeakCenter.
PeakInside Gets the PeakInside.
PeakOutside Gets the PeakOutside.
PhaseIncrement Gets or sets the PhaseIncrement.
Plies Plies property.
PlotData Gets the result table.
Ply Gets or sets the Ply selection.
Position Gets or sets the Position.
Probability Gets the Probability.
Properties Gets the list of properties for this object.
RPMSelection Gets or sets the RPM Selection value at which the results are evaluated.
ReportedFrequency Gets the ReportedFrequency.
ScaleFactor Gets or sets the ScaleFactor.
ScopingMethod Gets or sets the ScopingMethod.
SetNumber Gets or sets the Set Number.
SolutionCombinationDriver Gets or sets the SolutionCombinationDriver.
SolverComponentIDs Gets or sets the SolverComponentIDs.
StressStrainType Gets or sets the StressStrainType.
SubScopeBy Gets or sets the SubScopeBy.
Substep Gets the Substep.
Subtype Gets or sets the Subtype.
Suppressed Gets or sets the Suppressed.
Surface Surface property.
SurfaceCoating SurfaceCoating property.
SweepingPhase Gets or sets the SweepingPhase.
ThroughThicknessBendingStress Gets or sets the ThroughThicknessBendingStress.
Time Gets the Time.
TimeForMaximumOfMaximumValues Get the Time for the maximum of maximum values.
TimeForMaximumOfMinimumValues Get the Time for the maximum of minimum values.
TimeForMinimumOfMaximumValues Get the Time for the minimum of maximum values.
TimeForMinimumOfMinimumValues Get the Time for the minimum of minimum values.
Total Gets the Total.
TotalCenter Gets the TotalCenter.
TotalInside Gets the TotalInside.
TotalOutside Gets the TotalOutside.
VisibleProperties Gets the list of properties that are visible for this object.

Property detail

property MembraneStressEquivalent.Amplitude : bool | None

Gets or sets the Amplitude.

property MembraneStressEquivalent.Average : Ansys.Core.Units.Quantity | None

Gets the Average.

property MembraneStressEquivalent.AverageAcrossBodies : bool | None

Gets or sets the AverageAcrossBodies.

property MembraneStressEquivalent.AverageRadiusOfCurvature : Ansys.Core.Units.Quantity | None

Gets or sets the AverageRadiusOfCurvature.

property MembraneStressEquivalent.BendingInside : Ansys.Core.Units.Quantity | None

Gets the BendingInside.

property MembraneStressEquivalent.BendingOutside : Ansys.Core.Units.Quantity | None

Gets the BendingOutside.

property MembraneStressEquivalent.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property MembraneStressEquivalent.CalculateTimeHistory : bool | None

Gets or sets the CalculateTimeHistory.

property MembraneStressEquivalent.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property MembraneStressEquivalent.CombinationNumber : int | None

Gets or sets the Combination Number for a Solution Combination result.

property MembraneStressEquivalent.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property MembraneStressEquivalent.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property MembraneStressEquivalent.CrackFrontNumber : int | None

Gets or sets the CrackFrontNumber.

property MembraneStressEquivalent.CyclicMode : int | None

Gets or sets the CyclicMode.

property MembraneStressEquivalent.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property MembraneStressEquivalent.DisplayOption : Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None

Gets or sets the DisplayOption.

property MembraneStressEquivalent.DisplayTime : Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property MembraneStressEquivalent.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property MembraneStressEquivalent.EnvironmentSelection : Ansys.ACT.Automation.Mechanical.Analysis | None

Gets or sets the EnvironmentSelection.

property MembraneStressEquivalent.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property MembraneStressEquivalent.Frequency : Ansys.Core.Units.Quantity | None

Gets or sets the Frequency.

property MembraneStressEquivalent.GlobalIDs : str | None

Gets or sets the GlobalIDs.

property MembraneStressEquivalent.GraphControlsXAxis : Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None

Gets or sets the GraphControlsXAxis.

property MembraneStressEquivalent.HarmonicIndex : int | None

Gets or sets the HarmonicIndex.

property MembraneStressEquivalent.Identifier : str | None

Gets or sets the Identifier.

property MembraneStressEquivalent.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property MembraneStressEquivalent.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None

Gets the internal object. For advanced usage only.

property MembraneStressEquivalent.IsSolved : bool | None

Gets the IsSolved.

property MembraneStressEquivalent.ItemType : Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None

Gets or sets the ItemType.

property MembraneStressEquivalent.IterationNumber : int | None

Gets the IterationNumber.

property MembraneStressEquivalent.IterationStep : int | None

Gets or sets the IterationStep.

property MembraneStressEquivalent.Layer : int | None

Gets or sets the Layer.

property MembraneStressEquivalent.Linearized2DBehavior : Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None

Gets or sets the Linearized2DBehavior.

property MembraneStressEquivalent.LoadMultiplier : float | None

Gets the LoadMultiplier.

property MembraneStressEquivalent.LoadStep : int | None

Gets the LoadStep.

property MembraneStressEquivalent.LoadStepForMaximumOfMaximumValues : int | None

Get the Load Step for the maximum of maximum values.

property MembraneStressEquivalent.LoadStepForMaximumOfMinimumValues : int | None

Get the Load Step for the maximum of minimum values.

property MembraneStressEquivalent.LoadStepForMinimumOfMaximumValues : int | None

Get the Load Step for the minimum of maximum values.

property MembraneStressEquivalent.LoadStepForMinimumOfMinimumValues : int | None

Get the Load Step for the minimum of minimum values.

property MembraneStressEquivalent.LoadStepNumber : int | None

Gets or sets the LoadStepNumber.

property MembraneStressEquivalent.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property MembraneStressEquivalent.Maximum : Ansys.Core.Units.Quantity | None

Gets the Maximum.

property MembraneStressEquivalent.MaximumOccursOn : str | None

Gets the MaximumOccursOn.

property MembraneStressEquivalent.MaximumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMaximumOverTime.

property MembraneStressEquivalent.MaximumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMinimumOverTime.

property MembraneStressEquivalent.Membrane : Ansys.Core.Units.Quantity | None

Gets the Membrane.

property MembraneStressEquivalent.MembraneBendingCenter : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingCenter.

property MembraneStressEquivalent.MembraneBendingInside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingInside.

property MembraneStressEquivalent.MembraneBendingOutside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingOutside.

property MembraneStressEquivalent.Minimum : Ansys.Core.Units.Quantity | None

Gets the Minimum.

property MembraneStressEquivalent.MinimumOccursOn : str | None

Gets the MinimumOccursOn.

property MembraneStressEquivalent.MinimumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMaximumOverTime.

property MembraneStressEquivalent.MinimumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMinimumOverTime.

property MembraneStressEquivalent.Mode : int | None

Gets or sets the Mode.

property MembraneStressEquivalent.NamedSelections : Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets or sets the NamedSelections.

property MembraneStressEquivalent.NormalOrientation : Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None

Gets or sets the NormalOrientation.

property MembraneStressEquivalent.Path : Ansys.ACT.Automation.Mechanical.Path | None

Path property.

property MembraneStressEquivalent.PeakCenter : Ansys.Core.Units.Quantity | None

Gets the PeakCenter.

property MembraneStressEquivalent.PeakInside : Ansys.Core.Units.Quantity | None

Gets the PeakInside.

property MembraneStressEquivalent.PeakOutside : Ansys.Core.Units.Quantity | None

Gets the PeakOutside.

property MembraneStressEquivalent.PhaseIncrement : Ansys.Core.Units.Quantity | None

Gets or sets the PhaseIncrement.

property MembraneStressEquivalent.Plies : Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None

Plies property.

property MembraneStressEquivalent.PlotData : Ansys.Mechanical.DataModel.Results.ResultDataTable | None

Gets the result table.

property MembraneStressEquivalent.Ply : Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None

Gets or sets the Ply selection.

property MembraneStressEquivalent.Position : Ansys.Mechanical.DataModel.Enums.ShellFaceType | None

Gets or sets the Position.

property MembraneStressEquivalent.Probability : float | None

Gets the Probability.

property MembraneStressEquivalent.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property MembraneStressEquivalent.RPMSelection : Ansys.Core.Units.Quantity | None

Gets or sets the RPM Selection value at which the results are evaluated.

property MembraneStressEquivalent.ReportedFrequency : Ansys.Core.Units.Quantity | None

Gets the ReportedFrequency.

property MembraneStressEquivalent.ScaleFactor : Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None

Gets or sets the ScaleFactor.

property MembraneStressEquivalent.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property MembraneStressEquivalent.SetNumber : int | None

Gets or sets the Set Number.

property MembraneStressEquivalent.SolutionCombinationDriver : Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None

Gets or sets the SolutionCombinationDriver.

property MembraneStressEquivalent.SolverComponentIDs : str | None

Gets or sets the SolverComponentIDs.

property MembraneStressEquivalent.StressStrainType : Ansys.Mechanical.DataModel.Enums.StressStrainType | None

Gets or sets the StressStrainType.

property MembraneStressEquivalent.SubScopeBy : Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None

Gets or sets the SubScopeBy.

property MembraneStressEquivalent.Substep : int | None

Gets the Substep.

property MembraneStressEquivalent.Subtype : Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None

Gets or sets the Subtype.

property MembraneStressEquivalent.Suppressed : bool | None

Gets or sets the Suppressed.

property MembraneStressEquivalent.Surface : Ansys.ACT.Automation.Mechanical.Surface | None

Surface property.

property MembraneStressEquivalent.SurfaceCoating : Ansys.ACT.Automation.Mechanical.SurfaceCoating | None

SurfaceCoating property.

property MembraneStressEquivalent.SweepingPhase : Ansys.Core.Units.Quantity | None

Gets or sets the SweepingPhase.

property MembraneStressEquivalent.ThroughThicknessBendingStress : Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None

Gets or sets the ThroughThicknessBendingStress.

property MembraneStressEquivalent.Time : Ansys.Core.Units.Quantity | None

Gets the Time.

property MembraneStressEquivalent.TimeForMaximumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of maximum values.

property MembraneStressEquivalent.TimeForMaximumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of minimum values.

property MembraneStressEquivalent.TimeForMinimumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of maximum values.

property MembraneStressEquivalent.TimeForMinimumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of minimum values.

property MembraneStressEquivalent.Total : Ansys.Core.Units.Quantity | None

Gets the Total.

property MembraneStressEquivalent.TotalCenter : Ansys.Core.Units.Quantity | None

Gets the TotalCenter.

property MembraneStressEquivalent.TotalInside : Ansys.Core.Units.Quantity | None

Gets the TotalInside.

property MembraneStressEquivalent.TotalOutside : Ansys.Core.Units.Quantity | None

Gets the TotalOutside.

property MembraneStressEquivalent.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

MembraneStressEquivalent.Activate()

Activate the current object.

MembraneStressEquivalent.AddAlert()

Creates a new Alert

MembraneStressEquivalent.AddComment()

Creates a new child Comment.

MembraneStressEquivalent.AddConvergence()

Creates a new Convergence

MembraneStressEquivalent.AddFigure()

Creates a new child Figure.

MembraneStressEquivalent.AddImage(filePath: str)

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MembraneStressEquivalent.ClearGeneratedData()

Run the ClearGeneratedData action.

MembraneStressEquivalent.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

MembraneStressEquivalent.CreateParameter(propName: str)

CreateParameter method.

MembraneStressEquivalent.CreateResultsAtAllSets()

Creates results at all sets for results under a solution.

MembraneStressEquivalent.Delete()

Run the Delete action.

MembraneStressEquivalent.Duplicate()

Creates a copy of the current DataModelObject.

MembraneStressEquivalent.DuplicateWithoutResults()

Run the DuplicateWithoutResults action.

MembraneStressEquivalent.EvaluateAllResults()

Run the EvaluateAllResults action.

MembraneStressEquivalent.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings)

Run the ExportAnimation action.

MembraneStressEquivalent.ExportToTextFile(filePath: str)

Run the ExportToTextFile action.

MembraneStressEquivalent.FetchRemoteResults()

Run the FetchRemoteResult action.

MembraneStressEquivalent.GetChildren(recurses: bool, children: List[ChildrenType])

Gets the list of children, filtered by type.

MembraneStressEquivalent.GetParameter(propName: str)

Gets the parameter corresponding to the given property.

MembraneStressEquivalent.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

MembraneStressEquivalent.GroupSimilarObjects()

Run the GroupSimilarObjects action.

MembraneStressEquivalent.PromoteToNamedSelection()

Run the PromoteToNamedSelection action.

MembraneStressEquivalent.PropertyByAPIName(name: str)

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MembraneStressEquivalent.PropertyByName(name: str)

Get a property by its unique name.

MembraneStressEquivalent.RemoveParameter(propName: str)

Removes the parameter from the parameter set corresponding to the given property.

MembraneStressEquivalent.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.