LinearizedShearStress
Last update: 14.01.2025
LinearizedShearStress
class Ansys.ACT.Automation.Mechanical.Results.LinearizedStressResults.LinearizedShearStress
Bases: object
Defines a LinearizedShearStress.
Overview
Methods
Name | Description |
---|---|
Activate |
Activate the current object. |
AddAlert |
Creates a new Alert |
AddComment |
Creates a new child Comment. |
AddConvergence |
Creates a new Convergence |
AddFigure |
Creates a new child Figure. |
AddImage |
Creates a new child Image. |
ClearGeneratedData |
Run the ClearGeneratedData action. |
CopyTo |
Copies all visible properties from this object to another. |
CreateParameter |
CreateParameter method. |
CreateResultsAtAllSets |
Creates results at all sets for results under a solution. |
Delete |
Run the Delete action. |
Duplicate |
Creates a copy of the current DataModelObject. |
DuplicateWithoutResults |
Run the DuplicateWithoutResults action. |
EvaluateAllResults |
Run the EvaluateAllResults action. |
ExportAnimation |
Run the ExportAnimation action. |
ExportToTextFile |
Run the ExportToTextFile action. |
FetchRemoteResults |
Run the FetchRemoteResult action. |
GetChildren |
Gets the list of children, filtered by type. |
GetParameter |
Gets the parameter corresponding to the given property. |
GroupAllSimilarChildren |
Run the GroupAllSimilarChildren action. |
GroupSimilarObjects |
Run the GroupSimilarObjects action. |
PromoteToNamedSelection |
Run the PromoteToNamedSelection action. |
PropertyByAPIName |
Get a property by its API name. |
PropertyByName |
Get a property by its unique name. |
RemoveParameter |
Removes the parameter from the parameter set corresponding to the given property. |
RenameBasedOnDefinition |
Run the RenameBasedOnDefinition action. |
Properties
Name | Description |
---|---|
Amplitude |
Gets or sets the Amplitude. |
Average |
Gets the Average. |
AverageRadiusOfCurvature |
Gets or sets the AverageRadiusOfCurvature. |
BendingInside |
Gets the BendingInside. |
BendingOutside |
Gets the BendingOutside. |
By |
Gets or sets the By. |
CalculateTimeHistory |
Gets or sets the CalculateTimeHistory. |
Children |
Gets the list of children. |
CombinationNumber |
Gets or sets the Combination Number for a Solution Combination result. |
Comments |
Gets the list of associated comments. |
CoordinateSystem |
Gets or sets the Coordinate System. |
CrackFrontNumber |
Gets or sets the CrackFrontNumber. |
DataModelObjectCategory |
Gets the current DataModelObject’s category. |
DisplayOption |
Gets or sets the DisplayOption. |
DisplayTime |
Gets or sets the DisplayTime. |
DpfEvaluation |
Gets or sets the DpfEvaluation. |
Figures |
Gets the list of associated figures. |
Frequency |
Gets or sets the Frequency. |
GlobalIDs |
Gets or sets the GlobalIDs. |
GraphControlsXAxis |
Gets or sets the GraphControlsXAxis. |
Identifier |
Gets or sets the Identifier. |
Images |
Gets the list of associated images. |
InternalObject |
Gets the internal object. For advanced usage only. |
IsSolved |
Gets the IsSolved. |
ItemType |
Gets or sets the ItemType. |
IterationNumber |
Gets the IterationNumber. |
Linearized2DBehavior |
Gets or sets the Linearized2DBehavior. |
LoadMultiplier |
Gets the LoadMultiplier. |
LoadStep |
Gets the LoadStep. |
LoadStepForMaximumOfMaximumValues |
Get the Load Step for the maximum of maximum values. |
LoadStepForMaximumOfMinimumValues |
Get the Load Step for the maximum of minimum values. |
LoadStepForMinimumOfMaximumValues |
Get the Load Step for the minimum of maximum values. |
LoadStepForMinimumOfMinimumValues |
Get the Load Step for the minimum of minimum values. |
LoadStepNumber |
Gets or sets the LoadStepNumber. |
Location |
Gets or sets the Location. |
Maximum |
Gets the Maximum. |
MaximumOccursOn |
Gets the MaximumOccursOn. |
MaximumOfMaximumOverTime |
Gets the MaximumOfMaximumOverTime. |
MaximumOfMinimumOverTime |
Gets the MaximumOfMinimumOverTime. |
Membrane |
Gets the Membrane. |
MembraneBendingCenter |
Gets the MembraneBendingCenter. |
MembraneBendingInside |
Gets the MembraneBendingInside. |
MembraneBendingOutside |
Gets the MembraneBendingOutside. |
Minimum |
Gets the Minimum. |
MinimumOccursOn |
Gets the MinimumOccursOn. |
MinimumOfMaximumOverTime |
Gets the MinimumOfMaximumOverTime. |
MinimumOfMinimumOverTime |
Gets the MinimumOfMinimumOverTime. |
NamedSelections |
Gets or sets the NamedSelections. |
NormalOrientation |
Gets or sets the NormalOrientation. |
Path |
Path property. |
PeakCenter |
Gets the PeakCenter. |
PeakInside |
Gets the PeakInside. |
PeakOutside |
Gets the PeakOutside. |
PlotData |
Gets the result table. |
Position |
Gets or sets the Position. |
Properties |
Gets the list of properties for this object. |
RPMSelection |
Gets or sets the RPM Selection value at which the results are evaluated. |
ScopingMethod |
Gets or sets the ScopingMethod. |
SetNumber |
Gets or sets the Set Number. |
ShearOrientation |
Gets or sets the ShearOrientation. |
SolutionCombinationDriver |
Gets or sets the SolutionCombinationDriver. |
SolverComponentIDs |
Gets or sets the SolverComponentIDs. |
StressStrainType |
Gets or sets the StressStrainType. |
Substep |
Gets the Substep. |
Subtype |
Gets or sets the Subtype. |
Suppressed |
Gets or sets the Suppressed. |
Surface |
Surface property. |
SurfaceCoating |
SurfaceCoating property. |
SweepingPhase |
Gets or sets the SweepingPhase. |
ThroughThicknessBendingStress |
Gets or sets the ThroughThicknessBendingStress. |
Time |
Gets the Time. |
TimeForMaximumOfMaximumValues |
Get the Time for the maximum of maximum values. |
TimeForMaximumOfMinimumValues |
Get the Time for the maximum of minimum values. |
TimeForMinimumOfMaximumValues |
Get the Time for the minimum of maximum values. |
TimeForMinimumOfMinimumValues |
Get the Time for the minimum of minimum values. |
Total |
Gets the Total. |
TotalCenter |
Gets the TotalCenter. |
TotalInside |
Gets the TotalInside. |
TotalOutside |
Gets the TotalOutside. |
VisibleProperties |
Gets the list of properties that are visible for this object. |
ZeroThroughThicknessBendingStress |
Gets or sets the ZeroThroughThicknessBendingStress. |
Property detail
property LinearizedShearStress.Amplitude : bool | None
Gets or sets the Amplitude.
property LinearizedShearStress.Average : Ansys.Core.Units.Quantity | None
Gets the Average.
property LinearizedShearStress.AverageRadiusOfCurvature : Ansys.Core.Units.Quantity | None
Gets or sets the AverageRadiusOfCurvature.
property LinearizedShearStress.BendingInside : Ansys.Core.Units.Quantity | None
Gets the BendingInside.
property LinearizedShearStress.BendingOutside : Ansys.Core.Units.Quantity | None
Gets the BendingOutside.
property LinearizedShearStress.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None
Gets or sets the By.
property LinearizedShearStress.CalculateTimeHistory : bool | None
Gets or sets the CalculateTimeHistory.
property LinearizedShearStress.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets the list of children.
property LinearizedShearStress.CombinationNumber : int | None
Gets or sets the Combination Number for a Solution Combination result.
property LinearizedShearStress.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None
Gets the list of associated comments.
property LinearizedShearStress.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.
property LinearizedShearStress.CrackFrontNumber : int | None
Gets or sets the CrackFrontNumber.
property LinearizedShearStress.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None
Gets the current DataModelObject’s category.
property LinearizedShearStress.DisplayOption : Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None
Gets or sets the DisplayOption.
property LinearizedShearStress.DisplayTime : Ansys.Core.Units.Quantity | None
Gets or sets the DisplayTime.
property LinearizedShearStress.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None
Gets or sets the DpfEvaluation.
property LinearizedShearStress.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None
Gets the list of associated figures.
property LinearizedShearStress.Frequency : Ansys.Core.Units.Quantity | None
Gets or sets the Frequency.
property LinearizedShearStress.GlobalIDs : str | None
Gets or sets the GlobalIDs.
property LinearizedShearStress.GraphControlsXAxis : Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None
Gets or sets the GraphControlsXAxis.
property LinearizedShearStress.Identifier : str | None
Gets or sets the Identifier.
property LinearizedShearStress.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None
Gets the list of associated images.
property LinearizedShearStress.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None
Gets the internal object. For advanced usage only.
property LinearizedShearStress.IsSolved : bool | None
Gets the IsSolved.
property LinearizedShearStress.ItemType : Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None
Gets or sets the ItemType.
property LinearizedShearStress.IterationNumber : int | None
Gets the IterationNumber.
property LinearizedShearStress.Linearized2DBehavior : Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None
Gets or sets the Linearized2DBehavior.
property LinearizedShearStress.LoadMultiplier : float | None
Gets the LoadMultiplier.
property LinearizedShearStress.LoadStep : int | None
Gets the LoadStep.
property LinearizedShearStress.LoadStepForMaximumOfMaximumValues : int | None
Get the Load Step for the maximum of maximum values.
property LinearizedShearStress.LoadStepForMaximumOfMinimumValues : int | None
Get the Load Step for the maximum of minimum values.
property LinearizedShearStress.LoadStepForMinimumOfMaximumValues : int | None
Get the Load Step for the minimum of maximum values.
property LinearizedShearStress.LoadStepForMinimumOfMinimumValues : int | None
Get the Load Step for the minimum of minimum values.
property LinearizedShearStress.LoadStepNumber : int | None
Gets or sets the LoadStepNumber.
property LinearizedShearStress.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None
Gets or sets the Location.
property LinearizedShearStress.Maximum : Ansys.Core.Units.Quantity | None
Gets the Maximum.
property LinearizedShearStress.MaximumOccursOn : str | None
Gets the MaximumOccursOn.
property LinearizedShearStress.MaximumOfMaximumOverTime : Ansys.Core.Units.Quantity | None
Gets the MaximumOfMaximumOverTime.
property LinearizedShearStress.MaximumOfMinimumOverTime : Ansys.Core.Units.Quantity | None
Gets the MaximumOfMinimumOverTime.
property LinearizedShearStress.Membrane : Ansys.Core.Units.Quantity | None
Gets the Membrane.
property LinearizedShearStress.MembraneBendingCenter : Ansys.Core.Units.Quantity | None
Gets the MembraneBendingCenter.
property LinearizedShearStress.MembraneBendingInside : Ansys.Core.Units.Quantity | None
Gets the MembraneBendingInside.
property LinearizedShearStress.MembraneBendingOutside : Ansys.Core.Units.Quantity | None
Gets the MembraneBendingOutside.
property LinearizedShearStress.Minimum : Ansys.Core.Units.Quantity | None
Gets the Minimum.
property LinearizedShearStress.MinimumOccursOn : str | None
Gets the MinimumOccursOn.
property LinearizedShearStress.MinimumOfMaximumOverTime : Ansys.Core.Units.Quantity | None
Gets the MinimumOfMaximumOverTime.
property LinearizedShearStress.MinimumOfMinimumOverTime : Ansys.Core.Units.Quantity | None
Gets the MinimumOfMinimumOverTime.
property LinearizedShearStress.NamedSelections : Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets or sets the NamedSelections.
property LinearizedShearStress.NormalOrientation : Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None
Gets or sets the NormalOrientation.
property LinearizedShearStress.Path : Ansys.ACT.Automation.Mechanical.Path | None
Path property.
property LinearizedShearStress.PeakCenter : Ansys.Core.Units.Quantity | None
Gets the PeakCenter.
property LinearizedShearStress.PeakInside : Ansys.Core.Units.Quantity | None
Gets the PeakInside.
property LinearizedShearStress.PeakOutside : Ansys.Core.Units.Quantity | None
Gets the PeakOutside.
property LinearizedShearStress.PlotData : Ansys.Mechanical.DataModel.Results.ResultDataTable | None
Gets the result table.
property LinearizedShearStress.Position : Ansys.Mechanical.DataModel.Enums.ShellFaceType | None
Gets or sets the Position.
property LinearizedShearStress.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties for this object.
property LinearizedShearStress.RPMSelection : Ansys.Core.Units.Quantity | None
Gets or sets the RPM Selection value at which the results are evaluated.
property LinearizedShearStress.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None
Gets or sets the ScopingMethod.
property LinearizedShearStress.SetNumber : int | None
Gets or sets the Set Number.
property LinearizedShearStress.ShearOrientation : Ansys.Mechanical.DataModel.Enums.ShearOrientationType | None
Gets or sets the ShearOrientation.
property LinearizedShearStress.SolutionCombinationDriver : Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None
Gets or sets the SolutionCombinationDriver.
property LinearizedShearStress.SolverComponentIDs : str | None
Gets or sets the SolverComponentIDs.
property LinearizedShearStress.StressStrainType : Ansys.Mechanical.DataModel.Enums.StressStrainType | None
Gets or sets the StressStrainType.
property LinearizedShearStress.Substep : int | None
Gets the Substep.
property LinearizedShearStress.Subtype : Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None
Gets or sets the Subtype.
property LinearizedShearStress.Suppressed : bool | None
Gets or sets the Suppressed.
property LinearizedShearStress.Surface : Ansys.ACT.Automation.Mechanical.Surface | None
Surface property.
property LinearizedShearStress.SurfaceCoating : Ansys.ACT.Automation.Mechanical.SurfaceCoating | None
SurfaceCoating property.
property LinearizedShearStress.SweepingPhase : Ansys.Core.Units.Quantity | None
Gets or sets the SweepingPhase.
property LinearizedShearStress.ThroughThicknessBendingStress : Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None
Gets or sets the ThroughThicknessBendingStress.
property LinearizedShearStress.Time : Ansys.Core.Units.Quantity | None
Gets the Time.
property LinearizedShearStress.TimeForMaximumOfMaximumValues : Ansys.Core.Units.Quantity | None
Get the Time for the maximum of maximum values.
property LinearizedShearStress.TimeForMaximumOfMinimumValues : Ansys.Core.Units.Quantity | None
Get the Time for the maximum of minimum values.
property LinearizedShearStress.TimeForMinimumOfMaximumValues : Ansys.Core.Units.Quantity | None
Get the Time for the minimum of maximum values.
property LinearizedShearStress.TimeForMinimumOfMinimumValues : Ansys.Core.Units.Quantity | None
Get the Time for the minimum of minimum values.
property LinearizedShearStress.Total : Ansys.Core.Units.Quantity | None
Gets the Total.
property LinearizedShearStress.TotalCenter : Ansys.Core.Units.Quantity | None
Gets the TotalCenter.
property LinearizedShearStress.TotalInside : Ansys.Core.Units.Quantity | None
Gets the TotalInside.
property LinearizedShearStress.TotalOutside : Ansys.Core.Units.Quantity | None
Gets the TotalOutside.
property LinearizedShearStress.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties that are visible for this object.
property LinearizedShearStress.ZeroThroughThicknessBendingStress : bool | None
Gets or sets the ZeroThroughThicknessBendingStress.
Method detail
LinearizedShearStress.Activate()
Activate the current object.
LinearizedShearStress.AddAlert()
Creates a new Alert
LinearizedShearStress.AddComment()
Creates a new child Comment.
LinearizedShearStress.AddConvergence()
Creates a new Convergence
LinearizedShearStress.AddFigure()
Creates a new child Figure.
LinearizedShearStress.AddImage(filePath: str)
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
LinearizedShearStress.ClearGeneratedData()
Run the ClearGeneratedData action.
LinearizedShearStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)
Copies all visible properties from this object to another.
LinearizedShearStress.CreateParameter(propName: str)
CreateParameter method.
LinearizedShearStress.CreateResultsAtAllSets()
Creates results at all sets for results under a solution.
LinearizedShearStress.Delete()
Run the Delete action.
LinearizedShearStress.Duplicate()
Creates a copy of the current DataModelObject.
LinearizedShearStress.DuplicateWithoutResults()
Run the DuplicateWithoutResults action.
LinearizedShearStress.EvaluateAllResults()
Run the EvaluateAllResults action.
LinearizedShearStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings)
Run the ExportAnimation action.
LinearizedShearStress.ExportToTextFile(filePath: str)
Run the ExportToTextFile action.
LinearizedShearStress.FetchRemoteResults()
Run the FetchRemoteResult action.
LinearizedShearStress.GetChildren(recurses: bool, children: List[ChildrenType])
Gets the list of children, filtered by type.
LinearizedShearStress.GetParameter(propName: str)
Gets the parameter corresponding to the given property.
LinearizedShearStress.GroupAllSimilarChildren()
Run the GroupAllSimilarChildren action.
LinearizedShearStress.GroupSimilarObjects()
Run the GroupSimilarObjects action.
LinearizedShearStress.PromoteToNamedSelection()
Run the PromoteToNamedSelection action.
LinearizedShearStress.PropertyByAPIName(name: str)
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
LinearizedShearStress.PropertyByName(name: str)
Get a property by its unique name.
LinearizedShearStress.RemoveParameter(propName: str)
Removes the parameter from the parameter set corresponding to the given property.
LinearizedShearStress.RenameBasedOnDefinition()
Run the RenameBasedOnDefinition action.