Skip to main content

Mechanical scripting interface

LinearizedNormalStress

Last update: 14.01.2025

class Ansys.ACT.Automation.Mechanical.Results.LinearizedStressResults.LinearizedNormalStress

Bases: object

Defines a LinearizedNormalStress.

Overview

Methods

Name Description
Activate Activate the current object.
AddAlert Creates a new Alert
AddComment Creates a new child Comment.
AddConvergence Creates a new Convergence
AddFigure Creates a new child Figure.
AddImage Creates a new child Image.
ClearGeneratedData Run the ClearGeneratedData action.
CopyTo Copies all visible properties from this object to another.
CreateParameter CreateParameter method.
CreateResultsAtAllSets Creates results at all sets for results under a solution.
Delete Run the Delete action.
Duplicate Creates a copy of the current DataModelObject.
DuplicateWithoutResults Run the DuplicateWithoutResults action.
EvaluateAllResults Run the EvaluateAllResults action.
ExportAnimation Run the ExportAnimation action.
ExportToTextFile Run the ExportToTextFile action.
FetchRemoteResults Run the FetchRemoteResult action.
GetChildren Gets the list of children, filtered by type.
GetParameter Gets the parameter corresponding to the given property.
GroupAllSimilarChildren Run the GroupAllSimilarChildren action.
GroupSimilarObjects Run the GroupSimilarObjects action.
PromoteToNamedSelection Run the PromoteToNamedSelection action.
PropertyByAPIName Get a property by its API name.
PropertyByName Get a property by its unique name.
RemoveParameter Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition Run the RenameBasedOnDefinition action.

Properties

Name Description
Amplitude Gets or sets the Amplitude.
Average Gets the Average.
AverageRadiusOfCurvature Gets or sets the AverageRadiusOfCurvature.
BendingInside Gets the BendingInside.
BendingOutside Gets the BendingOutside.
By Gets or sets the By.
CalculateTimeHistory Gets or sets the CalculateTimeHistory.
Children Gets the list of children.
CombinationNumber Gets or sets the Combination Number for a Solution Combination result.
Comments Gets the list of associated comments.
CoordinateSystem Gets or sets the Coordinate System.
CrackFrontNumber Gets or sets the CrackFrontNumber.
DataModelObjectCategory Gets the current DataModelObject’s category.
DisplayOption Gets or sets the DisplayOption.
DisplayTime Gets or sets the DisplayTime.
DpfEvaluation Gets or sets the DpfEvaluation.
Figures Gets the list of associated figures.
Frequency Gets or sets the Frequency.
GlobalIDs Gets or sets the GlobalIDs.
GraphControlsXAxis Gets or sets the GraphControlsXAxis.
Identifier Gets or sets the Identifier.
Images Gets the list of associated images.
InternalObject Gets the internal object. For advanced usage only.
IsSolved Gets the IsSolved.
ItemType Gets or sets the ItemType.
IterationNumber Gets the IterationNumber.
Linearized2DBehavior Gets or sets the Linearized2DBehavior.
LoadMultiplier Gets the LoadMultiplier.
LoadStep Gets the LoadStep.
LoadStepForMaximumOfMaximumValues Get the Load Step for the maximum of maximum values.
LoadStepForMaximumOfMinimumValues Get the Load Step for the maximum of minimum values.
LoadStepForMinimumOfMaximumValues Get the Load Step for the minimum of maximum values.
LoadStepForMinimumOfMinimumValues Get the Load Step for the minimum of minimum values.
LoadStepNumber Gets or sets the LoadStepNumber.
Location Gets or sets the Location.
Maximum Gets the Maximum.
MaximumOccursOn Gets the MaximumOccursOn.
MaximumOfMaximumOverTime Gets the MaximumOfMaximumOverTime.
MaximumOfMinimumOverTime Gets the MaximumOfMinimumOverTime.
Membrane Gets the Membrane.
MembraneBendingCenter Gets the MembraneBendingCenter.
MembraneBendingInside Gets the MembraneBendingInside.
MembraneBendingOutside Gets the MembraneBendingOutside.
Minimum Gets the Minimum.
MinimumOccursOn Gets the MinimumOccursOn.
MinimumOfMaximumOverTime Gets the MinimumOfMaximumOverTime.
MinimumOfMinimumOverTime Gets the MinimumOfMinimumOverTime.
NamedSelections Gets or sets the NamedSelections.
NormalOrientation Gets or sets the NormalOrientation.
Path Path property.
PeakCenter Gets the PeakCenter.
PeakInside Gets the PeakInside.
PeakOutside Gets the PeakOutside.
PlotData Gets the result table.
Position Gets or sets the Position.
Properties Gets the list of properties for this object.
RPMSelection Gets or sets the RPM Selection value at which the results are evaluated.
ScopingMethod Gets or sets the ScopingMethod.
SetNumber Gets or sets the Set Number.
SolutionCombinationDriver Gets or sets the SolutionCombinationDriver.
SolverComponentIDs Gets or sets the SolverComponentIDs.
StressStrainType Gets or sets the StressStrainType.
Substep Gets the Substep.
Subtype Gets or sets the Subtype.
Suppressed Gets or sets the Suppressed.
Surface Surface property.
SurfaceCoating SurfaceCoating property.
SweepingPhase Gets or sets the SweepingPhase.
ThroughThicknessBendingStress Gets or sets the ThroughThicknessBendingStress.
Time Gets the Time.
TimeForMaximumOfMaximumValues Get the Time for the maximum of maximum values.
TimeForMaximumOfMinimumValues Get the Time for the maximum of minimum values.
TimeForMinimumOfMaximumValues Get the Time for the minimum of maximum values.
TimeForMinimumOfMinimumValues Get the Time for the minimum of minimum values.
Total Gets the Total.
TotalCenter Gets the TotalCenter.
TotalInside Gets the TotalInside.
TotalOutside Gets the TotalOutside.
VisibleProperties Gets the list of properties that are visible for this object.
ZeroThroughThicknessBendingStress Gets or sets the ZeroThroughThicknessBendingStress.

Property detail

property LinearizedNormalStress.Amplitude : bool | None

Gets or sets the Amplitude.

property LinearizedNormalStress.Average : Ansys.Core.Units.Quantity | None

Gets the Average.

property LinearizedNormalStress.AverageRadiusOfCurvature : Ansys.Core.Units.Quantity | None

Gets or sets the AverageRadiusOfCurvature.

property LinearizedNormalStress.BendingInside : Ansys.Core.Units.Quantity | None

Gets the BendingInside.

property LinearizedNormalStress.BendingOutside : Ansys.Core.Units.Quantity | None

Gets the BendingOutside.

property LinearizedNormalStress.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property LinearizedNormalStress.CalculateTimeHistory : bool | None

Gets or sets the CalculateTimeHistory.

property LinearizedNormalStress.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property LinearizedNormalStress.CombinationNumber : int | None

Gets or sets the Combination Number for a Solution Combination result.

property LinearizedNormalStress.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property LinearizedNormalStress.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property LinearizedNormalStress.CrackFrontNumber : int | None

Gets or sets the CrackFrontNumber.

property LinearizedNormalStress.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property LinearizedNormalStress.DisplayOption : Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None

Gets or sets the DisplayOption.

property LinearizedNormalStress.DisplayTime : Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property LinearizedNormalStress.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property LinearizedNormalStress.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property LinearizedNormalStress.Frequency : Ansys.Core.Units.Quantity | None

Gets or sets the Frequency.

property LinearizedNormalStress.GlobalIDs : str | None

Gets or sets the GlobalIDs.

property LinearizedNormalStress.GraphControlsXAxis : Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None

Gets or sets the GraphControlsXAxis.

property LinearizedNormalStress.Identifier : str | None

Gets or sets the Identifier.

property LinearizedNormalStress.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property LinearizedNormalStress.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None

Gets the internal object. For advanced usage only.

property LinearizedNormalStress.IsSolved : bool | None

Gets the IsSolved.

property LinearizedNormalStress.ItemType : Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None

Gets or sets the ItemType.

property LinearizedNormalStress.IterationNumber : int | None

Gets the IterationNumber.

property LinearizedNormalStress.Linearized2DBehavior : Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None

Gets or sets the Linearized2DBehavior.

property LinearizedNormalStress.LoadMultiplier : float | None

Gets the LoadMultiplier.

property LinearizedNormalStress.LoadStep : int | None

Gets the LoadStep.

property LinearizedNormalStress.LoadStepForMaximumOfMaximumValues : int | None

Get the Load Step for the maximum of maximum values.

property LinearizedNormalStress.LoadStepForMaximumOfMinimumValues : int | None

Get the Load Step for the maximum of minimum values.

property LinearizedNormalStress.LoadStepForMinimumOfMaximumValues : int | None

Get the Load Step for the minimum of maximum values.

property LinearizedNormalStress.LoadStepForMinimumOfMinimumValues : int | None

Get the Load Step for the minimum of minimum values.

property LinearizedNormalStress.LoadStepNumber : int | None

Gets or sets the LoadStepNumber.

property LinearizedNormalStress.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property LinearizedNormalStress.Maximum : Ansys.Core.Units.Quantity | None

Gets the Maximum.

property LinearizedNormalStress.MaximumOccursOn : str | None

Gets the MaximumOccursOn.

property LinearizedNormalStress.MaximumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMaximumOverTime.

property LinearizedNormalStress.MaximumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMinimumOverTime.

property LinearizedNormalStress.Membrane : Ansys.Core.Units.Quantity | None

Gets the Membrane.

property LinearizedNormalStress.MembraneBendingCenter : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingCenter.

property LinearizedNormalStress.MembraneBendingInside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingInside.

property LinearizedNormalStress.MembraneBendingOutside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingOutside.

property LinearizedNormalStress.Minimum : Ansys.Core.Units.Quantity | None

Gets the Minimum.

property LinearizedNormalStress.MinimumOccursOn : str | None

Gets the MinimumOccursOn.

property LinearizedNormalStress.MinimumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMaximumOverTime.

property LinearizedNormalStress.MinimumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMinimumOverTime.

property LinearizedNormalStress.NamedSelections : Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets or sets the NamedSelections.

property LinearizedNormalStress.NormalOrientation : Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None

Gets or sets the NormalOrientation.

property LinearizedNormalStress.Path : Ansys.ACT.Automation.Mechanical.Path | None

Path property.

property LinearizedNormalStress.PeakCenter : Ansys.Core.Units.Quantity | None

Gets the PeakCenter.

property LinearizedNormalStress.PeakInside : Ansys.Core.Units.Quantity | None

Gets the PeakInside.

property LinearizedNormalStress.PeakOutside : Ansys.Core.Units.Quantity | None

Gets the PeakOutside.

property LinearizedNormalStress.PlotData : Ansys.Mechanical.DataModel.Results.ResultDataTable | None

Gets the result table.

property LinearizedNormalStress.Position : Ansys.Mechanical.DataModel.Enums.ShellFaceType | None

Gets or sets the Position.

property LinearizedNormalStress.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property LinearizedNormalStress.RPMSelection : Ansys.Core.Units.Quantity | None

Gets or sets the RPM Selection value at which the results are evaluated.

property LinearizedNormalStress.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property LinearizedNormalStress.SetNumber : int | None

Gets or sets the Set Number.

property LinearizedNormalStress.SolutionCombinationDriver : Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None

Gets or sets the SolutionCombinationDriver.

property LinearizedNormalStress.SolverComponentIDs : str | None

Gets or sets the SolverComponentIDs.

property LinearizedNormalStress.StressStrainType : Ansys.Mechanical.DataModel.Enums.StressStrainType | None

Gets or sets the StressStrainType.

property LinearizedNormalStress.Substep : int | None

Gets the Substep.

property LinearizedNormalStress.Subtype : Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None

Gets or sets the Subtype.

property LinearizedNormalStress.Suppressed : bool | None

Gets or sets the Suppressed.

property LinearizedNormalStress.Surface : Ansys.ACT.Automation.Mechanical.Surface | None

Surface property.

property LinearizedNormalStress.SurfaceCoating : Ansys.ACT.Automation.Mechanical.SurfaceCoating | None

SurfaceCoating property.

property LinearizedNormalStress.SweepingPhase : Ansys.Core.Units.Quantity | None

Gets or sets the SweepingPhase.

property LinearizedNormalStress.ThroughThicknessBendingStress : Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None

Gets or sets the ThroughThicknessBendingStress.

property LinearizedNormalStress.Time : Ansys.Core.Units.Quantity | None

Gets the Time.

property LinearizedNormalStress.TimeForMaximumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of maximum values.

property LinearizedNormalStress.TimeForMaximumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of minimum values.

property LinearizedNormalStress.TimeForMinimumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of maximum values.

property LinearizedNormalStress.TimeForMinimumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of minimum values.

property LinearizedNormalStress.Total : Ansys.Core.Units.Quantity | None

Gets the Total.

property LinearizedNormalStress.TotalCenter : Ansys.Core.Units.Quantity | None

Gets the TotalCenter.

property LinearizedNormalStress.TotalInside : Ansys.Core.Units.Quantity | None

Gets the TotalInside.

property LinearizedNormalStress.TotalOutside : Ansys.Core.Units.Quantity | None

Gets the TotalOutside.

property LinearizedNormalStress.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property LinearizedNormalStress.ZeroThroughThicknessBendingStress : bool | None

Gets or sets the ZeroThroughThicknessBendingStress.

Method detail

LinearizedNormalStress.Activate()

Activate the current object.

LinearizedNormalStress.AddAlert()

Creates a new Alert

LinearizedNormalStress.AddComment()

Creates a new child Comment.

LinearizedNormalStress.AddConvergence()

Creates a new Convergence

LinearizedNormalStress.AddFigure()

Creates a new child Figure.

LinearizedNormalStress.AddImage(filePath: str)

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

LinearizedNormalStress.ClearGeneratedData()

Run the ClearGeneratedData action.

LinearizedNormalStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

LinearizedNormalStress.CreateParameter(propName: str)

CreateParameter method.

LinearizedNormalStress.CreateResultsAtAllSets()

Creates results at all sets for results under a solution.

LinearizedNormalStress.Delete()

Run the Delete action.

LinearizedNormalStress.Duplicate()

Creates a copy of the current DataModelObject.

LinearizedNormalStress.DuplicateWithoutResults()

Run the DuplicateWithoutResults action.

LinearizedNormalStress.EvaluateAllResults()

Run the EvaluateAllResults action.

LinearizedNormalStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings)

Run the ExportAnimation action.

LinearizedNormalStress.ExportToTextFile(filePath: str)

Run the ExportToTextFile action.

LinearizedNormalStress.FetchRemoteResults()

Run the FetchRemoteResult action.

LinearizedNormalStress.GetChildren(recurses: bool, children: List[ChildrenType])

Gets the list of children, filtered by type.

LinearizedNormalStress.GetParameter(propName: str)

Gets the parameter corresponding to the given property.

LinearizedNormalStress.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

LinearizedNormalStress.GroupSimilarObjects()

Run the GroupSimilarObjects action.

LinearizedNormalStress.PromoteToNamedSelection()

Run the PromoteToNamedSelection action.

LinearizedNormalStress.PropertyByAPIName(name: str)

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

LinearizedNormalStress.PropertyByName(name: str)

Get a property by its unique name.

LinearizedNormalStress.RemoveParameter(propName: str)

Removes the parameter from the parameter set corresponding to the given property.

LinearizedNormalStress.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.