class Ansys.ACT.Automation.Mechanical.Results.DamageResults.FiberTensileFailureCriterion

Bases: object

Defines a FiberTensileFailureCriterion.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddAlert	Creates a new Alert
AddComment	Creates a new child Comment.
AddConvergence	Creates a new Convergence
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	CreateParameter method.
CreateResultsAtAllSets	Creates results at all sets for results under a solution.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
ExportToTextFile	Run the ExportToTextFile action.
FetchRemoteResults	Run the FetchRemoteResult action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PromoteToNamedSelection	Run the PromoteToNamedSelection action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.

Properties

Name	Description
Average	Gets the Average.
By	Gets or sets the By.
CalculateTimeHistory	Gets or sets the CalculateTimeHistory.
Children	Gets the list of children.
CombinationNumber	Gets or sets the Combination Number for a Solution Combination result.
Comments	Gets the list of associated comments.
CoordinateSystem	Gets or sets the Coordinate System.
CrackFrontNumber	Gets or sets the CrackFrontNumber.
DamageResultType	Gets the DamageResultType.
DataModelObjectCategory	Gets the current DataModelObject’s category.
DisplayOption	Gets or sets the DisplayOption.
DisplayTime	Gets or sets the DisplayTime.
DpfEvaluation	Gets or sets the DpfEvaluation.
Figures	Gets the list of associated figures.
GlobalIDs	Gets or sets the GlobalIDs.
GraphControlsXAxis	Gets or sets the GraphControlsXAxis.
Identifier	Gets or sets the Identifier.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IsSolved	Gets the IsSolved.
ItemType	Gets or sets the ItemType.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepForMaximumOfMaximumValues	Get the Load Step for the maximum of maximum values.
LoadStepForMaximumOfMinimumValues	Get the Load Step for the maximum of minimum values.
LoadStepForMinimumOfMaximumValues	Get the Load Step for the minimum of maximum values.
LoadStepForMinimumOfMinimumValues	Get the Load Step for the minimum of minimum values.
LoadStepNumber	Gets or sets the LoadStepNumber.
Location	Gets or sets the Location.
Maximum	Gets the Maximum.
MaximumOccursOn	Gets the MaximumOccursOn.
MaximumOfMaximumOverTime	Gets the MaximumOfMaximumOverTime.
MaximumOfMinimumOverTime	Gets the MaximumOfMinimumOverTime.
Minimum	Gets the Minimum.
MinimumOccursOn	Gets the MinimumOccursOn.
MinimumOfMaximumOverTime	Gets the MinimumOfMaximumOverTime.
MinimumOfMinimumOverTime	Gets the MinimumOfMinimumOverTime.
Mode	Gets or sets the Mode.
NamedSelections	Gets or sets the NamedSelections.
Path	Path property.
Plies	Plies property.
PlotData	Gets the result table.
Ply	Gets or sets the Ply selection.
Properties	Gets the list of properties for this object.
RPMSelection	Gets or sets the RPM Selection value at which the results are evaluated.
ScopingMethod	Gets or sets the ScopingMethod.
SetNumber	Gets or sets the Set Number.
SolutionCombinationDriver	Gets or sets the SolutionCombinationDriver.
SolverComponentIDs	Gets or sets the SolverComponentIDs.
Substep	Gets the Substep.
Suppressed	Gets or sets the Suppressed.
Surface	Surface property.
SurfaceCoating	SurfaceCoating property.
Time	Gets the Time.
TimeForMaximumOfMaximumValues	Get the Time for the maximum of maximum values.
TimeForMaximumOfMinimumValues	Get the Time for the maximum of minimum values.
TimeForMinimumOfMaximumValues	Get the Time for the minimum of maximum values.
TimeForMinimumOfMinimumValues	Get the Time for the minimum of minimum values.
Total	Gets the Total.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property FiberTensileFailureCriterion.Average : Ansys.Core.Units.Quantity | None

Gets the Average.

property FiberTensileFailureCriterion.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property FiberTensileFailureCriterion.CalculateTimeHistory : bool | None

Gets or sets the CalculateTimeHistory.

property FiberTensileFailureCriterion.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property FiberTensileFailureCriterion.CombinationNumber : int | None

Gets or sets the Combination Number for a Solution Combination result.

property FiberTensileFailureCriterion.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property FiberTensileFailureCriterion.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property FiberTensileFailureCriterion.CrackFrontNumber : int | None

Gets or sets the CrackFrontNumber.

property FiberTensileFailureCriterion.DamageResultType : Ansys.Mechanical.DataModel.Enums.DamageResultType | None

Gets the DamageResultType.

property FiberTensileFailureCriterion.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property FiberTensileFailureCriterion.DisplayOption : Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None

Gets or sets the DisplayOption.

property FiberTensileFailureCriterion.DisplayTime : Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property FiberTensileFailureCriterion.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property FiberTensileFailureCriterion.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property FiberTensileFailureCriterion.GlobalIDs : str | None

Gets or sets the GlobalIDs.

property FiberTensileFailureCriterion.GraphControlsXAxis : Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None

Gets or sets the GraphControlsXAxis.

property FiberTensileFailureCriterion.Identifier : str | None

Gets or sets the Identifier.

property FiberTensileFailureCriterion.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property FiberTensileFailureCriterion.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None

Gets the internal object. For advanced usage only.

property FiberTensileFailureCriterion.IsSolved : bool | None

Gets the IsSolved.

property FiberTensileFailureCriterion.ItemType : Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None

Gets or sets the ItemType.

property FiberTensileFailureCriterion.IterationNumber : int | None

Gets the IterationNumber.

property FiberTensileFailureCriterion.LoadStep : int | None

Gets the LoadStep.

property FiberTensileFailureCriterion.LoadStepForMaximumOfMaximumValues : int | None

Get the Load Step for the maximum of maximum values.

property FiberTensileFailureCriterion.LoadStepForMaximumOfMinimumValues : int | None

Get the Load Step for the maximum of minimum values.

property FiberTensileFailureCriterion.LoadStepForMinimumOfMaximumValues : int | None

Get the Load Step for the minimum of maximum values.

property FiberTensileFailureCriterion.LoadStepForMinimumOfMinimumValues : int | None

Get the Load Step for the minimum of minimum values.

property FiberTensileFailureCriterion.LoadStepNumber : int | None

Gets or sets the LoadStepNumber.

property FiberTensileFailureCriterion.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property FiberTensileFailureCriterion.Maximum : Ansys.Core.Units.Quantity | None

Gets the Maximum.

property FiberTensileFailureCriterion.MaximumOccursOn : str | None

Gets the MaximumOccursOn.

property FiberTensileFailureCriterion.MaximumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMaximumOverTime.

property FiberTensileFailureCriterion.MaximumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMinimumOverTime.

property FiberTensileFailureCriterion.Minimum : Ansys.Core.Units.Quantity | None

Gets the Minimum.

property FiberTensileFailureCriterion.MinimumOccursOn : str | None

Gets the MinimumOccursOn.

property FiberTensileFailureCriterion.MinimumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMaximumOverTime.

property FiberTensileFailureCriterion.MinimumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMinimumOverTime.

property FiberTensileFailureCriterion.Mode : int | None

Gets or sets the Mode.

property FiberTensileFailureCriterion.NamedSelections : Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets or sets the NamedSelections.

property FiberTensileFailureCriterion.Path : Ansys.ACT.Automation.Mechanical.Path | None

Path property.

property FiberTensileFailureCriterion.Plies : Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None

Plies property.

property FiberTensileFailureCriterion.PlotData : Ansys.Mechanical.DataModel.Results.ResultDataTable | None

Gets the result table.

property FiberTensileFailureCriterion.Ply : Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None

Gets or sets the Ply selection.

property FiberTensileFailureCriterion.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property FiberTensileFailureCriterion.RPMSelection : Ansys.Core.Units.Quantity | None

Gets or sets the RPM Selection value at which the results are evaluated.

property FiberTensileFailureCriterion.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property FiberTensileFailureCriterion.SetNumber : int | None

Gets or sets the Set Number.

property FiberTensileFailureCriterion.SolutionCombinationDriver : Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None

Gets or sets the SolutionCombinationDriver.

property FiberTensileFailureCriterion.SolverComponentIDs : str | None

Gets or sets the SolverComponentIDs.

property FiberTensileFailureCriterion.Substep : int | None

Gets the Substep.

property FiberTensileFailureCriterion.Suppressed : bool | None

Gets or sets the Suppressed.

property FiberTensileFailureCriterion.Surface : Ansys.ACT.Automation.Mechanical.Surface | None

Surface property.

property FiberTensileFailureCriterion.SurfaceCoating : Ansys.ACT.Automation.Mechanical.SurfaceCoating | None

SurfaceCoating property.

property FiberTensileFailureCriterion.Time : Ansys.Core.Units.Quantity | None

Gets the Time.

property FiberTensileFailureCriterion.TimeForMaximumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of maximum values.

property FiberTensileFailureCriterion.TimeForMaximumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of minimum values.

property FiberTensileFailureCriterion.TimeForMinimumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of maximum values.

property FiberTensileFailureCriterion.TimeForMinimumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of minimum values.

property FiberTensileFailureCriterion.Total : Ansys.Core.Units.Quantity | None

Gets the Total.

property FiberTensileFailureCriterion.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

FiberTensileFailureCriterion.Activate()

Activate the current object.

FiberTensileFailureCriterion.AddAlert()

Creates a new Alert

FiberTensileFailureCriterion.AddComment()

Creates a new child Comment.

FiberTensileFailureCriterion.AddConvergence()

Creates a new Convergence

FiberTensileFailureCriterion.AddFigure()

Creates a new child Figure.

FiberTensileFailureCriterion.AddImage(filePath: str)

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

FiberTensileFailureCriterion.ClearGeneratedData()

Run the ClearGeneratedData action.

FiberTensileFailureCriterion.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

FiberTensileFailureCriterion.CreateParameter(propName: str)

CreateParameter method.

FiberTensileFailureCriterion.CreateResultsAtAllSets()

Creates results at all sets for results under a solution.

FiberTensileFailureCriterion.Delete()

Run the Delete action.

FiberTensileFailureCriterion.Duplicate()

Creates a copy of the current DataModelObject.

FiberTensileFailureCriterion.DuplicateWithoutResults()

Run the DuplicateWithoutResults action.

FiberTensileFailureCriterion.EvaluateAllResults()

Run the EvaluateAllResults action.

FiberTensileFailureCriterion.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings)

Run the ExportAnimation action.

FiberTensileFailureCriterion.ExportToTextFile(filePath: str)

Run the ExportToTextFile action.

FiberTensileFailureCriterion.FetchRemoteResults()

Run the FetchRemoteResult action.

FiberTensileFailureCriterion.GetChildren(recurses: bool, children: List[ChildrenType])

Gets the list of children, filtered by type.

FiberTensileFailureCriterion.GetParameter(propName: str)

Gets the parameter corresponding to the given property.

FiberTensileFailureCriterion.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

FiberTensileFailureCriterion.GroupSimilarObjects()

Run the GroupSimilarObjects action.

FiberTensileFailureCriterion.PromoteToNamedSelection()

Run the PromoteToNamedSelection action.

FiberTensileFailureCriterion.PropertyByAPIName(name: str)

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

FiberTensileFailureCriterion.PropertyByName(name: str)

Get a property by its unique name.

FiberTensileFailureCriterion.RemoveParameter(propName: str)

Removes the parameter from the parameter set corresponding to the given property.

FiberTensileFailureCriterion.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.