Skip to main content

Mechanical scripting interface

AutomaticMethod

Last update: 14.01.2025

class Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod

Bases: object

Defines a AutomaticMethod.

Overview

Methods

Name Description
Activate Activate the current object.
AddComment Creates a new child Comment.
AddFigure Creates a new child Figure.
AddImage Creates a new child Image.
CopyTo Copies all visible properties from this object to another.
CreateParameter Creates a new parameter for a Property.
Delete Run the Delete action.
Duplicate Creates a copy of the current DataModelObject.
GenerateMesh Generate the Mesh.
GetChildren Gets the list of children, filtered by type.
GetParameter Gets the parameter corresponding to the given property.
GroupAllSimilarChildren Run the GroupAllSimilarChildren action.
GroupSimilarObjects Run the GroupSimilarObjects action.
PropertyByAPIName Get a property by its API name.
PropertyByName Get a property by its unique name.
RemoveParameter Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition Run the RenameBasedOnDefinition action.

Properties

Name Description
Active Gets the Active.
AggressiveInflateOption Gets or sets the AggressiveInflateOption.
AggressiveTetImprovement Gets or sets the AggressiveTetImprovement.
Algorithm Gets or sets the Algorithm.
ApproximativeNumberOfElementsPerPart Gets or sets the ApproximativeNumberOfElementsPerPart.
AutoCollapseShortEdges Gets or sets the AutoCollapseShortEdges.
AutoPinchFaces Gets or sets the AutoPinchFaces.
AutoPinchTolerance Gets or sets the AutoPinchTolerance.
AutoRemoveThinFaces Gets or sets the AutoRemoveThinFaces.
AutoRepairFeatureAngle Gets or sets the AutoRepairFeatureAngle.
AutoRepairPartialDefeature Gets or sets the use of partial defeature, which partially removes thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed.
AutoSharpAngle Gets or sets the AutoSharpAngle.
AutoShortEdgeLength Gets or sets the AutoShortEdgeLength.
AutoThinFaceWidth Gets or sets the AutoThinFaceWidth.
AutomaticNodeMovement Gets or sets the AutomaticNodeMovement method under PCTet.
BFCartSubType Gets the BFCartSubType.
BFCartTolerance Gets the BFCartTolerance.
BodyStackingType Gets or sets the BodyStackingType.
CartSweepSpacingOption Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).
CartesianSize Gets or sets the CartesianSize in Multizone.
Children Gets the list of children.
Clearence Gets or sets the Clearence.
Comments Gets the list of associated comments.
ConstrainBoundary Gets or sets the ConstrainBoundary.
ControlMessages Gets the ControlMessages.
CoordinateSystem Gets or sets the CoordinateSystem.
CornerAngle Gets or sets the CornerAngle.
CurvatureNormalAngle Gets or sets the CurvatureNormalAngle.
DataModelObjectCategory Gets the current DataModelObject’s category.
DecompositionType Gets or sets the DecompositionType in Multizone.
DefeatureLayerVolume Gets or sets the DefeatureLayerVolume.
DefeaturingTolerance Gets or sets the DefeaturingTolerance.
DefinedBy Gets or sets the DefinedBy.
ElementMidsideNodes Gets or sets the ElementMidsideNodes.
ElementOption Gets or sets the ElementOption.
ElementOrder Gets or sets the ElementOrder.
FaceProximityGapFactor Gets or sets the FaceProximityGapFactor for PCTet.
FallBackMeshType Gets or sets the FallBackMeshType.
FeatureAngle Gets or sets the FeatureAngle.
FeatureProtectionAngle Gets or sets the DihedralAngle for AutoNodeMove under PCTet.
Figures Gets the list of associated figures.
FilletCollapse Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).
FillingDirection Gets or sets the FillingDirection.
FillingFraction Gets or sets the FillingFraction.
FreeFaceMeshType Gets or sets the FreeFaceMeshType.
FreeMeshType Gets or sets the FreeMeshType.
GenerateLayersUsingFacets Gets or sets the GenerateLayersUsingFacets.
Images Gets the list of associated images.
ImprovementIterations Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.
InflateRelativeTolerance Gets or sets the InflateRelativeTolerance.
InternalObject Gets the internal object. For advanced usage only.
KeyPointsSelection Gets or sets the KeyPointsSelection.
KeyPointsTolerance Gets or sets the KeyPoints Tolerance in Multizone.
LateralDefeatureSize Gets or sets the LateralDefeatureSize.
LayerHeight Gets or sets the LayerHeight.
LayerStart Gets or sets the LayerStart.
Location Gets or sets the Location.
MZSweepNumberDivisions
MappedSweptType Gets or sets the MappedSweptType.
MatchMeshWherePossible Gets or sets the MatchMeshWherePossible.
MaximumElementSize Gets or sets the MaximumElementSize.
MeshBasedDefeaturing Gets or sets the MeshBasedDefeaturing.
MeshFlowControl Gets or sets the MeshFlowControl.
MeshInCenter Gets or sets the MeshInCenter.
MeshType Gets or sets the MeshType.
MeshUsingVoxelization Gets or sets the MeshUsingVoxelization.
Method Gets or sets the Method.
MinimumEdgeLength Gets the MinimumEdgeLength.
MinimumSizeLimit Gets or sets the MinimumSizeLimit.
MinimumThickness Gets or sets the MinimumThickness for PCTet.
NamedSelection Gets or sets the NamedSelection.
NumberOfCellsAcrossGap Gets or sets the NumberOfCellsAcrossGap.
NumberOfElementLayers Gets or sets the NumberOfElementLayers for PCTet.
OverlappingAngle Gets or sets the OverlappingAngle.
PartialFill Gets or sets the PartialFill.
ParticleCoordinateSystem Gets or sets the ParticleCoordinateSystem.
ParticleDiameter Gets or sets the ParticleDiameter.
PreserveBoundaries Gets or sets the PreserveBoundaries.
PrimeMethodAutoRepair Gets or sets the PrimeMethodAutoRepair.
PrimeRepairTolerance Gets or sets repair tolerance length for Prime meshing. This can be used to reduce variability of output topology, prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is.
ProjectCornersToTop Gets or sets the ProjectCornersToTop.
ProjectInConstantZPlane Gets or sets the ProjectInConstantZPlane.
ProjectionFactor Gets or sets the ProjectionFactor.
Properties Gets the list of properties for this object.
RadialGrowthRate Gets or sets the RadialGrowthRate.
RefineAtThinSection Gets or sets the RefineAtThinSection for PCTet.
RefineSurfaceMesh Gets or sets the RefineSurfaceMesh for PCTet.
Refinement Gets or sets the Refinement.
RelativeTolerance Gets or sets the PrimeRelativeTolerance.
RemoveSharpAngleFaces Gets or sets the RemoveSharpAngleFaces.
RepairFacets Gets or sets the RepairFacets.
RestrictNodeMovementsToSurface Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.
ReuseBlocking Gets or sets the ReuseBlocking.
ScopingMethod Gets or sets the ScopingMethod.
ShowAdvancedImproveOptions Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.
SlicerFeatureAngle Gets or sets the SlicerFeatureAngle.
SliverTriangleHeight Gets or sets the SliverTriangleHeight.
SmoothMeshSpacing Gets or sets the SmoothMeshSpacing in Multizone.
SmoothTransition Gets or sets the SmoothTransition.
SolidShellElementForStacker Gets or sets the SolidShellElementForStacker.
SolidShellElementForStackerGeometrySelection Gets or sets the SolidShellElementForStackerGeometrySelection.
SolidShellElementForStackerNamedSelection Gets or sets the SolidShellElementForStackerNamedSelection.
SolidShellElementForStackerScopingMethod Gets or sets the SolidShellElementForStackerScopingMethod.
SourceLocation Gets or sets the SourceLocation.
SourceTargetSelection Gets or sets the SourceTargetSelection.
SpacingOption Gets or sets the SpacingOption.
SplitAngle Gets or sets the SplitAngle in Multizone.
SrcTrgNamedSelection Sets Named selection as Source/Target for MultiZone control.
SrcTrgScopingMethod Sets Scoping method for Source/Target selection for MultiZone control.
StackerCoordinateSystem Gets or sets the StackerCoordinateSystem.
StackerFreeFaceMeshType Gets or sets the StackerFreeFaceMeshType.
StackerTriangleReduction Gets or sets the StackerTriangleReduction.
StackingAxis Gets or sets the StackingAxis.
StackingDefeatureSize Gets or sets the StackingDefeatureSize.
StretchFactorX Gets or sets the StretchFactorX.
StretchFactorY Gets or sets the StretchFactorY.
StretchFactorZ Gets or sets the StretchFactorZ.
SubsampleRate Gets or sets the SubsampleRate.
Suppressed Gets or sets the Suppressed.
SurfaceMeshMethod Gets or sets the SurfaceMeshMethod.
SweepBiasType Gets or sets the SweepBiasType.
SweepBiasValue Gets or sets the SweepBiasValue.
SweepESizeType Gets or sets the SweepESizeType.
SweepEdges Gets or sets the SweepEdges.
SweepElementSize Gets or sets the SweepElementSize.
SweepNumberDivisions Gets or sets the SweepNumberDivisions.
SweepSizeBehavior Gets or sets the SweepSizeBehavior.
SweepThickness Gets or sets the SweepThickness in Multizone.
TargetLocation Gets or sets the TargetLocation.
TetraGrowthRate Gets or sets the TetraGrowthRate.
TriangleReduction Gets or sets the TriangleReduction.
UseSplitAngle Gets or sets the UseSplitAngle in Multizone.
VisibleProperties Gets the list of properties that are visible for this object.
WallThickness Gets or sets the WallThickness.
WriteICEMCFDFiles Gets or sets the WriteICEMCFDFiles.

Property detail

property AutomaticMethod.Active : bool | None

Gets the Active.

property AutomaticMethod.AggressiveInflateOption : bool | None

Gets or sets the AggressiveInflateOption.

property AutomaticMethod.AggressiveTetImprovement : bool | None

Gets or sets the AggressiveTetImprovement.

property AutomaticMethod.Algorithm : Ansys.Mechanical.DataModel.Enums.MeshMethodAlgorithm | None

Gets or sets the Algorithm.

property AutomaticMethod.ApproximativeNumberOfElementsPerPart : int | None

Gets or sets the ApproximativeNumberOfElementsPerPart.

property AutomaticMethod.AutoCollapseShortEdges : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoCollapseShortEdges.

property AutomaticMethod.AutoPinchFaces : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoPinchFaces.

property AutomaticMethod.AutoPinchTolerance : Ansys.Core.Units.Quantity | None

Gets or sets the AutoPinchTolerance.

property AutomaticMethod.AutoRemoveThinFaces : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoRemoveThinFaces.

property AutomaticMethod.AutoRepairFeatureAngle : Ansys.Core.Units.Quantity | None

Gets or sets the AutoRepairFeatureAngle.

property AutomaticMethod.AutoRepairPartialDefeature : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the use of partial defeature, which partially removes thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed.

property AutomaticMethod.AutoSharpAngle : Ansys.Core.Units.Quantity | None

Gets or sets the AutoSharpAngle.

property AutomaticMethod.AutoShortEdgeLength : Ansys.Core.Units.Quantity | None

Gets or sets the AutoShortEdgeLength.

property AutomaticMethod.AutoThinFaceWidth : Ansys.Core.Units.Quantity | None

Gets or sets the AutoThinFaceWidth.

property AutomaticMethod.AutomaticNodeMovement : Ansys.Mechanical.DataModel.Enums.AutomaticNodeMovementMethod | None

Gets or sets the AutomaticNodeMovement method under PCTet.

property AutomaticMethod.BFCartSubType : int | None

Gets the BFCartSubType.

property AutomaticMethod.BFCartTolerance : Ansys.Core.Units.Quantity | None

Gets the BFCartTolerance.

property AutomaticMethod.BodyStackingType : Ansys.Mechanical.DataModel.Enums.BodyStackingType | None

Gets or sets the BodyStackingType.

property AutomaticMethod.CartSweepSpacingOption : int | None

Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).

property AutomaticMethod.CartesianSize : Ansys.Core.Units.Quantity | None

Gets or sets the CartesianSize in Multizone.

property AutomaticMethod.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property AutomaticMethod.Clearence : Ansys.Core.Units.Quantity | None

Gets or sets the Clearence.

property AutomaticMethod.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property AutomaticMethod.ConstrainBoundary : bool | None

Gets or sets the ConstrainBoundary.

property AutomaticMethod.ControlMessages : bool | None

Gets the ControlMessages.

property AutomaticMethod.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystem.

property AutomaticMethod.CornerAngle : Ansys.Core.Units.Quantity | None

Gets or sets the CornerAngle.

property AutomaticMethod.CurvatureNormalAngle : Ansys.Core.Units.Quantity | None

Gets or sets the CurvatureNormalAngle.

property AutomaticMethod.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property AutomaticMethod.DecompositionType : Ansys.Mechanical.DataModel.Enums.DecompositionType | None

Gets or sets the DecompositionType in Multizone.

property AutomaticMethod.DefeatureLayerVolume : float | None

Gets or sets the DefeatureLayerVolume.

property AutomaticMethod.DefeaturingTolerance : Ansys.Core.Units.Quantity | None

Gets or sets the DefeaturingTolerance.

property AutomaticMethod.DefinedBy : Ansys.Mechanical.DataModel.Enums.PatchIndependentDefineType | None

Gets or sets the DefinedBy.

property AutomaticMethod.ElementMidsideNodes : Ansys.Mechanical.DataModel.Enums.ElementMidsideNodesType | None

Gets or sets the ElementMidsideNodes.

property AutomaticMethod.ElementOption : Ansys.Mechanical.DataModel.Enums.SweepElementOptionType | None

Gets or sets the ElementOption.

property AutomaticMethod.ElementOrder : Ansys.Mechanical.DataModel.Enums.ElementOrder | None

Gets or sets the ElementOrder.

property AutomaticMethod.FaceProximityGapFactor : float | None

Gets or sets the FaceProximityGapFactor for PCTet.

property AutomaticMethod.FallBackMeshType : Ansys.Mechanical.DataModel.Enums.SweepAxisymmetricFallBackMeshType | None

Gets or sets the FallBackMeshType.

property AutomaticMethod.FeatureAngle : Ansys.Core.Units.Quantity | None

Gets or sets the FeatureAngle.

property AutomaticMethod.FeatureProtectionAngle : Ansys.Core.Units.Quantity | None

Gets or sets the DihedralAngle for AutoNodeMove under PCTet.

property AutomaticMethod.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property AutomaticMethod.FilletCollapse : int | None

Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).

property AutomaticMethod.FillingDirection : Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None

Gets or sets the FillingDirection.

property AutomaticMethod.FillingFraction : float | None

Gets or sets the FillingFraction.

property AutomaticMethod.FreeFaceMeshType : int | None

Gets or sets the FreeFaceMeshType.

property AutomaticMethod.FreeMeshType : int | None

Gets or sets the FreeMeshType.

property AutomaticMethod.GenerateLayersUsingFacets : bool | None

Gets or sets the GenerateLayersUsingFacets.

property AutomaticMethod.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property AutomaticMethod.ImprovementIterations : int | None

Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.

property AutomaticMethod.InflateRelativeTolerance : float | None

Gets or sets the InflateRelativeTolerance.

property AutomaticMethod.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlAuto | None

Gets the internal object. For advanced usage only.

property AutomaticMethod.KeyPointsSelection : Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None

Gets or sets the KeyPointsSelection.

property AutomaticMethod.KeyPointsTolerance : Ansys.Core.Units.Quantity | None

Gets or sets the KeyPoints Tolerance in Multizone.

property AutomaticMethod.LateralDefeatureSize : float | None

Gets or sets the LateralDefeatureSize.

property AutomaticMethod.LayerHeight : float | None

Gets or sets the LayerHeight.

property AutomaticMethod.LayerStart : float | None

Gets or sets the LayerStart.

property AutomaticMethod.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property AutomaticMethod.MZSweepNumberDivisions : int | None

property AutomaticMethod.MappedSweptType : int | None

Gets or sets the MappedSweptType.

property AutomaticMethod.MatchMeshWherePossible : bool | None

Gets or sets the MatchMeshWherePossible.

property AutomaticMethod.MaximumElementSize : Ansys.Core.Units.Quantity | None

Gets or sets the MaximumElementSize.

property AutomaticMethod.MeshBasedDefeaturing : bool | None

Gets or sets the MeshBasedDefeaturing.

property AutomaticMethod.MeshFlowControl : Ansys.Mechanical.DataModel.Enums.MeshFlowControlMethod | None

Gets or sets the MeshFlowControl.

property AutomaticMethod.MeshInCenter : int | None

Gets or sets the MeshInCenter.

property AutomaticMethod.MeshType : Ansys.Mechanical.DataModel.Enums.MethodMeshType | None

Gets or sets the MeshType.

property AutomaticMethod.MeshUsingVoxelization : bool | None

Gets or sets the MeshUsingVoxelization.

property AutomaticMethod.Method : Ansys.Mechanical.DataModel.Enums.MethodType | None

Gets or sets the Method.

property AutomaticMethod.MinimumEdgeLength : Ansys.Core.Units.Quantity | None

Gets the MinimumEdgeLength.

property AutomaticMethod.MinimumSizeLimit : Ansys.Core.Units.Quantity | None

Gets or sets the MinimumSizeLimit.

property AutomaticMethod.MinimumThickness : Ansys.Core.Units.Quantity | None

Gets or sets the MinimumThickness for PCTet.

property AutomaticMethod.NamedSelection : Ansys.ACT.Automation.Mechanical.NamedSelection | None

Gets or sets the NamedSelection.

property AutomaticMethod.NumberOfCellsAcrossGap : int | None

Gets or sets the NumberOfCellsAcrossGap.

property AutomaticMethod.NumberOfElementLayers : int | None

Gets or sets the NumberOfElementLayers for PCTet.

property AutomaticMethod.OverlappingAngle : Ansys.Core.Units.Quantity | None

Gets or sets the OverlappingAngle.

property AutomaticMethod.PartialFill : bool | None

Gets or sets the PartialFill.

property AutomaticMethod.ParticleCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the ParticleCoordinateSystem.

property AutomaticMethod.ParticleDiameter : Ansys.Core.Units.Quantity | None

Gets or sets the ParticleDiameter.

property AutomaticMethod.PreserveBoundaries : int | None

Gets or sets the PreserveBoundaries.

property AutomaticMethod.PrimeMethodAutoRepair : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the PrimeMethodAutoRepair.

property AutomaticMethod.PrimeRepairTolerance : Ansys.Core.Units.Quantity | None

Gets or sets repair tolerance length for Prime meshing. This can be used to reduce variability of output topology, prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is.

property AutomaticMethod.ProjectCornersToTop : bool | None

Gets or sets the ProjectCornersToTop.

property AutomaticMethod.ProjectInConstantZPlane : bool | None

Gets or sets the ProjectInConstantZPlane.

property AutomaticMethod.ProjectionFactor : float | None

Gets or sets the ProjectionFactor.

property AutomaticMethod.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property AutomaticMethod.RadialGrowthRate : float | None

Gets or sets the RadialGrowthRate.

property AutomaticMethod.RefineAtThinSection : bool | None

Gets or sets the RefineAtThinSection for PCTet.

property AutomaticMethod.RefineSurfaceMesh : bool | None

Gets or sets the RefineSurfaceMesh for PCTet.

property AutomaticMethod.Refinement : int | None

Gets or sets the Refinement.

property AutomaticMethod.RelativeTolerance : float | None

Gets or sets the PrimeRelativeTolerance.

property AutomaticMethod.RemoveSharpAngleFaces : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the RemoveSharpAngleFaces.

property AutomaticMethod.RepairFacets : bool | None

Gets or sets the RepairFacets.

property AutomaticMethod.RestrictNodeMovementsToSurface : bool | None

Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.

property AutomaticMethod.ReuseBlocking : bool | None

Gets or sets the ReuseBlocking.

property AutomaticMethod.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property AutomaticMethod.ShowAdvancedImproveOptions : bool | None

Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.

property AutomaticMethod.SlicerFeatureAngle : float | None

Gets or sets the SlicerFeatureAngle.

property AutomaticMethod.SliverTriangleHeight : float | None

Gets or sets the SliverTriangleHeight.

property AutomaticMethod.SmoothMeshSpacing : bool | None

Gets or sets the SmoothMeshSpacing in Multizone.

property AutomaticMethod.SmoothTransition : bool | None

Gets or sets the SmoothTransition.

property AutomaticMethod.SolidShellElementForStacker : Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the SolidShellElementForStacker.

property AutomaticMethod.SolidShellElementForStackerGeometrySelection : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SolidShellElementForStackerGeometrySelection.

property AutomaticMethod.SolidShellElementForStackerNamedSelection : Ansys.ACT.Automation.Mechanical.NamedSelection | None

Gets or sets the SolidShellElementForStackerNamedSelection.

property AutomaticMethod.SolidShellElementForStackerScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the SolidShellElementForStackerScopingMethod.

property AutomaticMethod.SourceLocation : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SourceLocation.

property AutomaticMethod.SourceTargetSelection : int | None

Gets or sets the SourceTargetSelection.

property AutomaticMethod.SpacingOption : int | None

Gets or sets the SpacingOption.

property AutomaticMethod.SplitAngle : Ansys.Core.Units.Quantity | None

Gets or sets the SplitAngle in Multizone.

property AutomaticMethod.SrcTrgNamedSelection : Ansys.ACT.Automation.Mechanical.NamedSelection | None

Sets Named selection as Source/Target for MultiZone control.

property AutomaticMethod.SrcTrgScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Sets Scoping method for Source/Target selection for MultiZone control.

property AutomaticMethod.StackerCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the StackerCoordinateSystem.

property AutomaticMethod.StackerFreeFaceMeshType : Ansys.Mechanical.DataModel.Enums.StackerMethodMeshType | None

Gets or sets the StackerFreeFaceMeshType.

property AutomaticMethod.StackerTriangleReduction : Ansys.Mechanical.DataModel.Enums.TriangleReduction | None

Gets or sets the StackerTriangleReduction.

property AutomaticMethod.StackingAxis : Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None

Gets or sets the StackingAxis.

property AutomaticMethod.StackingDefeatureSize : float | None

Gets or sets the StackingDefeatureSize.

property AutomaticMethod.StretchFactorX : float | None

Gets or sets the StretchFactorX.

property AutomaticMethod.StretchFactorY : float | None

Gets or sets the StretchFactorY.

property AutomaticMethod.StretchFactorZ : float | None

Gets or sets the StretchFactorZ.

property AutomaticMethod.SubsampleRate : int | None

Gets or sets the SubsampleRate.

property AutomaticMethod.Suppressed : bool | None

Gets or sets the Suppressed.

property AutomaticMethod.SurfaceMeshMethod : int | None

Gets or sets the SurfaceMeshMethod.

property AutomaticMethod.SweepBiasType : Ansys.Mechanical.DataModel.Enums.BiasType | None

Gets or sets the SweepBiasType.

property AutomaticMethod.SweepBiasValue : float | None

Gets or sets the SweepBiasValue.

property AutomaticMethod.SweepESizeType : int | None

Gets or sets the SweepESizeType.

property AutomaticMethod.SweepEdges : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SweepEdges.

property AutomaticMethod.SweepElementSize : Ansys.Core.Units.Quantity | None

Gets or sets the SweepElementSize.

property AutomaticMethod.SweepNumberDivisions : int | None

Gets or sets the SweepNumberDivisions.

property AutomaticMethod.SweepSizeBehavior : int | None

Gets or sets the SweepSizeBehavior.

property AutomaticMethod.SweepThickness : Ansys.Core.Units.Quantity | None

Gets or sets the SweepThickness in Multizone.

property AutomaticMethod.TargetLocation : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the TargetLocation.

property AutomaticMethod.TetraGrowthRate : float | None

Gets or sets the TetraGrowthRate.

property AutomaticMethod.TriangleReduction : Ansys.Mechanical.DataModel.Enums.TriangleReduction | None

Gets or sets the TriangleReduction.

property AutomaticMethod.UseSplitAngle : bool | None

Gets or sets the UseSplitAngle in Multizone.

property AutomaticMethod.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property AutomaticMethod.WallThickness : Ansys.Core.Units.Quantity | None

Gets or sets the WallThickness.

property AutomaticMethod.WriteICEMCFDFiles : bool | None

Gets or sets the WriteICEMCFDFiles.

Method detail

AutomaticMethod.Activate()

Activate the current object.

AutomaticMethod.AddComment()

Creates a new child Comment.

AutomaticMethod.AddFigure()

Creates a new child Figure.

AutomaticMethod.AddImage(filePath: str)

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

AutomaticMethod.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

AutomaticMethod.CreateParameter(propName: str)

Creates a new parameter for a Property.

AutomaticMethod.Delete()

Run the Delete action.

AutomaticMethod.Duplicate()

Creates a copy of the current DataModelObject.

AutomaticMethod.GenerateMesh()

Generate the Mesh.

AutomaticMethod.GetChildren(recurses: bool, children: List[ChildrenType])

Gets the list of children, filtered by type.

AutomaticMethod.GetParameter(propName: str)

Gets the parameter corresponding to the given property.

AutomaticMethod.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

AutomaticMethod.GroupSimilarObjects()

Run the GroupSimilarObjects action.

AutomaticMethod.PropertyByAPIName(name: str)

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

AutomaticMethod.PropertyByName(name: str)

Get a property by its unique name.

AutomaticMethod.RemoveParameter(propName: str)

Removes the parameter from the parameter set corresponding to the given property.

AutomaticMethod.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.