ImportedThickness
Last update: 14.01.2025
ImportedThickness
class Ansys.ACT.Automation.Mechanical.ImportedLoads.ImportedThickness
Bases: object
Defines a ImportedThickness.
Overview
Methods
Name | Description |
---|---|
Activate |
Activate the current object. |
AddComment |
Creates a new child Comment. |
AddFigure |
Creates a new child Figure. |
AddImage |
Creates a new child Image. |
AddMappingValidation |
Creates a new MappingValidation |
ClearGeneratedData |
Run the ClearGeneratedData action. |
CopyTo |
Copies all visible properties from this object to another. |
CreateParameter |
Creates a new parameter for a Property. |
Delete |
Run the Delete action. |
Duplicate |
Creates a copy of the current DataModelObject. |
ExportToTextFile |
Run the ExportToTextFile action. |
GetActivateAtLoadStep |
GetActivateAtLoadStep method. |
GetChildren |
Gets the list of children, filtered by type. |
GetParameter |
Gets the parameter corresponding to the given property. |
GroupAllSimilarChildren |
Run the GroupAllSimilarChildren action. |
GroupSimilarObjects |
Run the GroupSimilarObjects action. |
Import |
Import. |
ImportLoad |
Run the ImportLoad action. |
PropertyByAPIName |
Get a property by its API name. |
PropertyByName |
Get a property by its unique name. |
ReloadConfiguration |
Reload the Imported Load’s setup from its associated configuration file (if available). |
RemoveParameter |
Removes the parameter from the parameter set corresponding to the given property. |
SetActivateAtLoadStep |
SetActivateAtLoadStep method. |
Properties
Name | Description |
---|---|
Algorithm |
Algorithm property. |
ApplyAs |
This controls how the imported load is applied, either as a boundary condition or an initial condition. |
BoundingBoxTolerance |
BoundingBoxTolerance property. |
Children |
Gets the list of children. |
Comments |
Gets the list of associated comments. |
CreateNameSelectionForMappedNodes |
CreateNameSelectionForMappedNodes property. |
CreateNameSelectionForOutsideNodes |
CreateNameSelectionForOutsideNodes property. |
CreateNameSelectionForUnmappedNodes |
CreateNameSelectionForUnmappedNodes property. |
DataModelObjectCategory |
Gets the current DataModelObject’s category. |
DisplayInteriorPoints |
DisplayInteriorPoints property. |
DisplayProjectionPlane |
DisplayProjectionPlane property. |
DisplaySourcePointIds |
DisplaySourcePointIds property. |
DisplaySourcePoints |
DisplaySourcePoints property. |
ExtrapolationTolerancePercent |
ExtrapolationTolerancePercent property. |
Figures |
Gets the list of associated figures. |
Images |
Gets the list of associated images. |
InternalObject |
Gets the internal object. For advanced usage only. |
Interpolation |
Interpolation property. |
KrigingCorrelationFunction |
KrigingCorrelationFunction property. |
KrigingPolynom |
KrigingPolynom property. |
Limit |
Limit property. |
Location |
Gets or sets the Location. |
MappedNodesName |
MappedNodesName property. |
Mapping |
Mapping property. |
MappingControl |
MappingControl property. |
MaxOutsideDistance |
MaxOutsideDistance property. |
Method |
Method property. |
NumberOfPoints |
NumberOfPoints property. |
OrientationRealignment |
OrientationRealignment property. |
OutsideDistanceCheck |
OutsideDistanceCheck property. |
OutsideNodesName |
OutsideNodesName property. |
OutsideOption |
OutsideOption property. |
Pinball |
Pinball property. |
Projection |
Projection property. |
Properties |
Gets the list of properties for this object. |
RigidBodyTransformationType |
RigidBodyTransformationType property. |
RigidTransformSourceCoordinateSystem |
RigidTransformSourceCoordinateSystem property. |
RigidTransformTargetCoordinateSystem |
RigidTransformTargetCoordinateSystem property. |
SharedRefBody |
Gets or sets the SharedRefBody. |
ShellThicknessFactor |
ShellThicknessFactor property. |
SourceMaximum |
SourceMaximum property. |
SourceMinimum |
SourceMinimum property. |
Suppressed |
Gets or sets the Suppressed. |
UnmappedNodesName |
UnmappedNodesName property. |
VariableType |
VariableType property. |
VisibleProperties |
Gets the list of properties that are visible for this object. |
Weighting |
Weighting property. |
Property detail
property ImportedThickness.Algorithm : Ansys.Mechanical.DataModel.Enums.MappingAlgorithm | None
Algorithm property.
property ImportedThickness.ApplyAs : Ansys.Mechanical.DataModel.Enums.ExternalLoadApplicationType | None
This controls how the imported load is applied, either as a boundary condition or an initial condition.
property ImportedThickness.BoundingBoxTolerance : Ansys.Core.Units.Quantity | None
BoundingBoxTolerance property.
property ImportedThickness.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets the list of children.
property ImportedThickness.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None
Gets the list of associated comments.
property ImportedThickness.CreateNameSelectionForMappedNodes : bool | None
CreateNameSelectionForMappedNodes property.
property ImportedThickness.CreateNameSelectionForOutsideNodes : bool | None
CreateNameSelectionForOutsideNodes property.
property ImportedThickness.CreateNameSelectionForUnmappedNodes : bool | None
CreateNameSelectionForUnmappedNodes property.
property ImportedThickness.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None
Gets the current DataModelObject’s category.
property ImportedThickness.DisplayInteriorPoints : bool | None
DisplayInteriorPoints property.
property ImportedThickness.DisplayProjectionPlane : bool | None
DisplayProjectionPlane property.
property ImportedThickness.DisplaySourcePointIds : bool | None
DisplaySourcePointIds property.
property ImportedThickness.DisplaySourcePoints : bool | None
DisplaySourcePoints property.
property ImportedThickness.ExtrapolationTolerancePercent : float | None
ExtrapolationTolerancePercent property.
property ImportedThickness.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None
Gets the list of associated figures.
property ImportedThickness.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None
Gets the list of associated images.
property ImportedThickness.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSExternalLoadAuto | None
Gets the internal object. For advanced usage only.
property ImportedThickness.Interpolation : Ansys.Mechanical.DataModel.Enums.InterpolationType | None
Interpolation property.
property ImportedThickness.KrigingCorrelationFunction : Ansys.Mechanical.DataModel.Enums.KrigingCorrFuncType | None
KrigingCorrelationFunction property.
property ImportedThickness.KrigingPolynom : Ansys.Mechanical.DataModel.Enums.KrigingPolynomType | None
KrigingPolynom property.
property ImportedThickness.Limit : int | None
Limit property.
property ImportedThickness.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None
Gets or sets the Location.
property ImportedThickness.MappedNodesName : str | None
MappedNodesName property.
property ImportedThickness.Mapping : Ansys.Mechanical.DataModel.Enums.MappingInterpolationType | None
Mapping property.
property ImportedThickness.MappingControl : Ansys.Mechanical.DataModel.Enums.MappingControlType | None
MappingControl property.
property ImportedThickness.MaxOutsideDistance : Ansys.Core.Units.Quantity | None
MaxOutsideDistance property.
property ImportedThickness.Method : Ansys.Mechanical.DataModel.Enums.MappingMethod | None
Method property.
property ImportedThickness.NumberOfPoints : int | None
NumberOfPoints property.
property ImportedThickness.OrientationRealignment : bool | None
OrientationRealignment property.
property ImportedThickness.OutsideDistanceCheck : bool | None
OutsideDistanceCheck property.
property ImportedThickness.OutsideNodesName : str | None
OutsideNodesName property.
property ImportedThickness.OutsideOption : Ansys.Mechanical.DataModel.Enums.MappingOutsideOption | None
OutsideOption property.
property ImportedThickness.Pinball : Ansys.Core.Units.Quantity | None
Pinball property.
property ImportedThickness.Projection : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
Projection property.
property ImportedThickness.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties for this object.
property ImportedThickness.RigidBodyTransformationType : Ansys.Mechanical.DataModel.Enums.RigidBodyTransformationType | None
RigidBodyTransformationType property.
property ImportedThickness.RigidTransformSourceCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
RigidTransformSourceCoordinateSystem property.
property ImportedThickness.RigidTransformTargetCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
RigidTransformTargetCoordinateSystem property.
property ImportedThickness.SharedRefBody : Ansys.ACT.Automation.Mechanical.Body | None
Gets or sets the SharedRefBody.
property ImportedThickness.ShellThicknessFactor : float | None
ShellThicknessFactor property.
property ImportedThickness.SourceMaximum : Ansys.Core.Units.Quantity | None
SourceMaximum property.
property ImportedThickness.SourceMinimum : Ansys.Core.Units.Quantity | None
SourceMinimum property.
property ImportedThickness.Suppressed : bool | None
Gets or sets the Suppressed.
property ImportedThickness.UnmappedNodesName : str | None
UnmappedNodesName property.
property ImportedThickness.VariableType : Ansys.Mechanical.DataModel.Enums.MappingVariableType | None
VariableType property.
property ImportedThickness.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties that are visible for this object.
property ImportedThickness.Weighting : Ansys.Mechanical.DataModel.Enums.WeightingType | None
Weighting property.
Method detail
ImportedThickness.Activate()
Activate the current object.
ImportedThickness.AddComment()
Creates a new child Comment.
ImportedThickness.AddFigure()
Creates a new child Figure.
ImportedThickness.AddImage(filePath: str)
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
ImportedThickness.AddMappingValidation()
Creates a new MappingValidation
ImportedThickness.ClearGeneratedData()
Run the ClearGeneratedData action.
ImportedThickness.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)
Copies all visible properties from this object to another.
ImportedThickness.CreateParameter(propName: str)
Creates a new parameter for a Property.
ImportedThickness.Delete()
Run the Delete action.
ImportedThickness.Duplicate()
Creates a copy of the current DataModelObject.
ImportedThickness.ExportToTextFile(filePath: str)
Run the ExportToTextFile action.
ImportedThickness.GetActivateAtLoadStep(stepNumber: int)
GetActivateAtLoadStep method.
ImportedThickness.GetChildren(recurses: bool, children: List[ChildrenType])
Gets the list of children, filtered by type.
ImportedThickness.GetParameter(propName: str)
Gets the parameter corresponding to the given property.
ImportedThickness.GroupAllSimilarChildren()
Run the GroupAllSimilarChildren action.
ImportedThickness.GroupSimilarObjects()
Run the GroupSimilarObjects action.
ImportedThickness.Import()
Import.
ImportedThickness.ImportLoad()
Run the ImportLoad action.
ImportedThickness.PropertyByAPIName(name: str)
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
ImportedThickness.PropertyByName(name: str)
Get a property by its unique name.
ImportedThickness.ReloadConfiguration()
Reload the Imported Load’s setup from its associated configuration file (if available).
ImportedThickness.RemoveParameter(propName: str)
Removes the parameter from the parameter set corresponding to the given property.
ImportedThickness.SetActivateAtLoadStep(stepNumber: int, bActive: bool)
SetActivateAtLoadStep method.