class Ansys.ACT.Automation.Mechanical.ImportedLoads.ImportedElementOrientation

Bases: object

Defines a ImportedElementOrientation.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddMappingValidation	Creates a new MappingValidation
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
ExportToTextFile	Run the ExportToTextFile action.
GetActivateAtLoadStep	GetActivateAtLoadStep method.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
Import	Import.
ImportLoad	Run the ImportLoad action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
ReloadConfiguration	Reload the Imported Load’s setup from its associated configuration file (if available).
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
SetActivateAtLoadStep	SetActivateAtLoadStep method.

Properties

Name	Description
Algorithm	Algorithm property.
ApplyAs	This controls how the imported load is applied, either as a boundary condition or an initial condition.
BoundingBoxTolerance	BoundingBoxTolerance property.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
CreateNameSelectionForMappedNodes	CreateNameSelectionForMappedNodes property.
CreateNameSelectionForOutsideNodes	CreateNameSelectionForOutsideNodes property.
CreateNameSelectionForUnmappedNodes	CreateNameSelectionForUnmappedNodes property.
DataModelObjectCategory	Gets the current DataModelObject’s category.
DisplayInteriorPoints	DisplayInteriorPoints property.
DisplayProjectionPlane	DisplayProjectionPlane property.
DisplaySourcePointIds	DisplaySourcePointIds property.
DisplaySourcePoints	DisplaySourcePoints property.
ExtrapolationTolerancePercent	ExtrapolationTolerancePercent property.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Interpolation	Interpolation property.
KrigingCorrelationFunction	KrigingCorrelationFunction property.
KrigingPolynom	KrigingPolynom property.
Limit	Limit property.
Location	Gets or sets the Location.
MappedNodesName	MappedNodesName property.
Mapping	Mapping property.
MappingControl	MappingControl property.
MaxOutsideDistance	MaxOutsideDistance property.
Method	Method property.
NumberOfPoints	NumberOfPoints property.
OrientationRealignment	OrientationRealignment property.
OutsideDistanceCheck	OutsideDistanceCheck property.
OutsideNodesName	OutsideNodesName property.
OutsideOption	OutsideOption property.
Pinball	Pinball property.
Projection	Projection property.
Properties	Gets the list of properties for this object.
RigidBodyTransformationType	RigidBodyTransformationType property.
RigidTransformSourceCoordinateSystem	RigidTransformSourceCoordinateSystem property.
RigidTransformTargetCoordinateSystem	RigidTransformTargetCoordinateSystem property.
SharedRefBody	Gets or sets the SharedRefBody.
ShellThicknessFactor	ShellThicknessFactor property.
SourceMaximum	SourceMaximum property.
SourceMinimum	SourceMinimum property.
Suppressed	Gets or sets the Suppressed.
UnmappedNodesName	UnmappedNodesName property.
VariableType	VariableType property.
VisibleProperties	Gets the list of properties that are visible for this object.
Weighting	Weighting property.

Property detail

property ImportedElementOrientation.Algorithm : Ansys.Mechanical.DataModel.Enums.MappingAlgorithm | None

Algorithm property.

property ImportedElementOrientation.ApplyAs : Ansys.Mechanical.DataModel.Enums.ExternalLoadApplicationType | None

This controls how the imported load is applied, either as a boundary condition or an initial condition.

property ImportedElementOrientation.BoundingBoxTolerance : Ansys.Core.Units.Quantity | None

BoundingBoxTolerance property.

property ImportedElementOrientation.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ImportedElementOrientation.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ImportedElementOrientation.CreateNameSelectionForMappedNodes : bool | None

CreateNameSelectionForMappedNodes property.

property ImportedElementOrientation.CreateNameSelectionForOutsideNodes : bool | None

CreateNameSelectionForOutsideNodes property.

property ImportedElementOrientation.CreateNameSelectionForUnmappedNodes : bool | None

CreateNameSelectionForUnmappedNodes property.

property ImportedElementOrientation.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property ImportedElementOrientation.DisplayInteriorPoints : bool | None

DisplayInteriorPoints property.

property ImportedElementOrientation.DisplayProjectionPlane : bool | None

DisplayProjectionPlane property.

property ImportedElementOrientation.DisplaySourcePointIds : bool | None

DisplaySourcePointIds property.

property ImportedElementOrientation.DisplaySourcePoints : bool | None

DisplaySourcePoints property.

property ImportedElementOrientation.ExtrapolationTolerancePercent : float | None

ExtrapolationTolerancePercent property.

property ImportedElementOrientation.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ImportedElementOrientation.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ImportedElementOrientation.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSExternalLoadAuto | None

Gets the internal object. For advanced usage only.

property ImportedElementOrientation.Interpolation : Ansys.Mechanical.DataModel.Enums.InterpolationType | None

Interpolation property.

property ImportedElementOrientation.KrigingCorrelationFunction : Ansys.Mechanical.DataModel.Enums.KrigingCorrFuncType | None

KrigingCorrelationFunction property.

property ImportedElementOrientation.KrigingPolynom : Ansys.Mechanical.DataModel.Enums.KrigingPolynomType | None

KrigingPolynom property.

property ImportedElementOrientation.Limit : int | None

Limit property.

property ImportedElementOrientation.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property ImportedElementOrientation.MappedNodesName : str | None

MappedNodesName property.

property ImportedElementOrientation.Mapping : Ansys.Mechanical.DataModel.Enums.MappingInterpolationType | None

Mapping property.

property ImportedElementOrientation.MappingControl : Ansys.Mechanical.DataModel.Enums.MappingControlType | None

MappingControl property.

property ImportedElementOrientation.MaxOutsideDistance : Ansys.Core.Units.Quantity | None

MaxOutsideDistance property.

property ImportedElementOrientation.Method : Ansys.Mechanical.DataModel.Enums.MappingMethod | None

Method property.

property ImportedElementOrientation.NumberOfPoints : int | None

NumberOfPoints property.

property ImportedElementOrientation.OrientationRealignment : bool | None

OrientationRealignment property.

property ImportedElementOrientation.OutsideDistanceCheck : bool | None

OutsideDistanceCheck property.

property ImportedElementOrientation.OutsideNodesName : str | None

OutsideNodesName property.

property ImportedElementOrientation.OutsideOption : Ansys.Mechanical.DataModel.Enums.MappingOutsideOption | None

OutsideOption property.

property ImportedElementOrientation.Pinball : Ansys.Core.Units.Quantity | None

Pinball property.

property ImportedElementOrientation.Projection : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Projection property.

property ImportedElementOrientation.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ImportedElementOrientation.RigidBodyTransformationType : Ansys.Mechanical.DataModel.Enums.RigidBodyTransformationType | None

RigidBodyTransformationType property.

property ImportedElementOrientation.RigidTransformSourceCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformSourceCoordinateSystem property.

property ImportedElementOrientation.RigidTransformTargetCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformTargetCoordinateSystem property.

property ImportedElementOrientation.SharedRefBody : Ansys.ACT.Automation.Mechanical.Body | None

Gets or sets the SharedRefBody.

property ImportedElementOrientation.ShellThicknessFactor : float | None

ShellThicknessFactor property.

property ImportedElementOrientation.SourceMaximum : Ansys.Core.Units.Quantity | None

SourceMaximum property.

property ImportedElementOrientation.SourceMinimum : Ansys.Core.Units.Quantity | None

SourceMinimum property.

property ImportedElementOrientation.Suppressed : bool | None

Gets or sets the Suppressed.

property ImportedElementOrientation.UnmappedNodesName : str | None

UnmappedNodesName property.

property ImportedElementOrientation.VariableType : Ansys.Mechanical.DataModel.Enums.MappingVariableType | None

VariableType property.

property ImportedElementOrientation.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property ImportedElementOrientation.Weighting : Ansys.Mechanical.DataModel.Enums.WeightingType | None

Weighting property.

Method detail

ImportedElementOrientation.Activate()

Activate the current object.

ImportedElementOrientation.AddComment()

Creates a new child Comment.

ImportedElementOrientation.AddFigure()

Creates a new child Figure.

ImportedElementOrientation.AddImage(filePath: str)

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ImportedElementOrientation.AddMappingValidation()

Creates a new MappingValidation

ImportedElementOrientation.ClearGeneratedData()

Run the ClearGeneratedData action.

ImportedElementOrientation.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

ImportedElementOrientation.CreateParameter(propName: str)

Creates a new parameter for a Property.

ImportedElementOrientation.Delete()

Run the Delete action.

ImportedElementOrientation.Duplicate()

Creates a copy of the current DataModelObject.

ImportedElementOrientation.ExportToTextFile(filePath: str)

Run the ExportToTextFile action.

ImportedElementOrientation.GetActivateAtLoadStep(stepNumber: int)

GetActivateAtLoadStep method.

ImportedElementOrientation.GetChildren(recurses: bool, children: List[ChildrenType])

Gets the list of children, filtered by type.

ImportedElementOrientation.GetParameter(propName: str)

Gets the parameter corresponding to the given property.

ImportedElementOrientation.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

ImportedElementOrientation.GroupSimilarObjects()

Run the GroupSimilarObjects action.

ImportedElementOrientation.Import()

Import.

ImportedElementOrientation.ImportLoad()

Run the ImportLoad action.

ImportedElementOrientation.PropertyByAPIName(name: str)

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ImportedElementOrientation.PropertyByName(name: str)

Get a property by its unique name.

ImportedElementOrientation.ReloadConfiguration()

Reload the Imported Load’s setup from its associated configuration file (if available).

ImportedElementOrientation.RemoveParameter(propName: str)

Removes the parameter from the parameter set corresponding to the given property.

ImportedElementOrientation.SetActivateAtLoadStep(stepNumber: int, bActive: bool)

SetActivateAtLoadStep method.